Samsung LE46B550, LE40B550, LE40B554, LE40B551 TV Remote Control Buttons Available in Anynet+ Mode

44

English Anynet+

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

Option	Description
View TV	Anynet+ mode changes to TV broadcast mode.
Device List	Shows the Anynet+ device list.
(device_name) Menu	Shows the connected device menus.
	E.g. If a DVD recorder is connected, the disc menu of the
	DVD recorder will appear.
(device_name) INFO	Shows the play menu of the connected device.
	E.g. If a DVD recorder is connected, the play menu of the
	DVD recorder will appear.
Recording: (*recorder)	Starts recording immediately using the recorder.
	(This is only available for devices that support the
	recording function.)
Stop Recording: (*recorder)	Stops recording.
Receiver	Sound is played through the receiver.

TV Remote Control Buttons Available in Anynet+ Mode

Device Type	Operating Status	Available Buttons
	After switching to the device,	Numeric buttons
		▲/▼/◄/►
	when the menu of the
		ENTEREbuttons
	corresponding device is displayed
	on the screen.	Colour buttons
Anynet+ Device		EXIT button
		π(Backward search)
	After switching to the device,	μ(Forward search)
	while playing a file	∫(Stop) / ∂(Play)
		∑(Pause)
Device with built-in	After switching to the device,
	when you are watching a TV	P >/ P <button
Tuner
	programme
Audio Device	When Receiver is activated	Y/ MUTE button

■The Anynet+ function only works when the active source on the TV remote control is set to TV.

■The ∏button works only while in the recordable state.

■You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control.

■The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.

■The Anynet+ functions do not operate with other manufacturers’ products.

■The π, μoperations may differ depending on the device.

■If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).