Sound Control
¦Configuring the Sound Menu
❑Mode → Standard / Music / Movie / Clear Voice / Custom
You can select a sound mode to suit your personal preferences.
T Press the TOOLS button to display the Tools menu. You can also set the sound mode by selecting Tools → Sound Mode.
❑Equalizer
The sound settings can be adjusted to suit your personal preference.
Mode
Selects the sound mode among the predefined settings.
Balance L/R
Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment) To adjust the level of different bandwidth frequencies.
Reset
Resets the equalizer settings to the default values.
❑SRS TruSurround HD → Off / On
Sound
Mode | : Custom | ► |
Equalizer |
|
|
SRS TruSurround HD | : Off |
|
Preferred Language | : English |
|
: Mono |
| |
Auto Volume | : Off |
|
Speaker Select | : TV Speaker |
|
SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any
❑Preferred Language (digital channels only)
O You can listen in a language other than the Preferred Language by pressing the MTS button on the remote control. N Preferred Language is available only in Digital TV mode.
N You can only select the language from among the actual languages being broadcast.
❑Multi-Track Sound (MTS) (analog channels only)
O Press the MTS button on the remote control repeatedly to select Mono, Stereo or SAP.
●Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
●Stereo: Choose for channels that are broadcasting in stereo.
●SAP: Choose to listen to the Separate Audio Program, which is usually a
N
N Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.
❑Auto Volume → Off / On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.