Problem | Possible Solution |
The picture appears distorted in the | If Screen Fit is selected with some external devices, the picture may appear distorted in |
corner of the screen. | the corner of the screen. This symptom is caused by the external devices, not TV. |
The ‘Resets all settings to the | This appears when you press and hold the EXIT button for a while. The product settings |
default values.’ message appears. | are reset to the factory defaults. |
You may see small particles if you | This is part of the product’s design and is not a defect. |
look closely at the edge of the bezel |
|
surrounding the TV screen. |
|
NThis TFT LCD panel uses a panel consisting of sub pixels (3 133 440) which require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
¦Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
N Standard dimensions for wall mount kits are shown in the table above.
N When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
NDo not use screws longer than the standard dimension, as they may cause damage to the inside of the TV set.
NFor wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on their specifications.
NDo not use screws that do not comply with the VESA standard screw specifications.
NDo not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.
NSamsung is not liable for product damage or personal injury when a
NOur 57” and 63” models do not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit for this model.
NDo not exceed 15 degrees tilt when mounting this TV.
Product Family | inches | VESA Spec. (A * B) | Standard Screw | Quantity | |
| 19 ~ 22 | 100 x 100 | M4 |
| |
| 23 ~ 29 | 200 x 100 |
| ||
|
|
| |||
|
|
|
|
| |
30 ~ 40 | 200 x 200 | M6 | 4 | ||
46 ~ 55 | 400 x 400 |
| |||
|
|
| |||
|
|
|
|
| |
| 57 ~ 70 | 800 x 400 | M8 |
| |
| 80 ~ | 1400 x 800 |
|
| |
| 42 ~ 50 | 400 x 400 |
|
| |
|
|
|
|
| |
58 ~ 63 | 600 x 400 | M8 | 4 | ||
70 ~ | 800 x 400 | ||||
|
|
| |||
|
|
|
|
| |
| 80 ~ | 1400 x 800 |
|
| |
| 30 ~39 | 200 x 200 | M6 |
| |
|
|
|
|
| |
LFD | 40 ~ 52 | 400 x 400 |
| 4 | |
55 ~ 70 | 800 x 400 | M8 | |||
|
| ||||
|
|
|
|
| |
| 70 ~ | 1400 x 800 |
|
| |
|
|
|
|
|
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.