Connecting to the PC Input
➢The PC(VIDEO/AUDIO-ST) connectors are used for interfacing with your PC.
➢How to Set up Your PC Software ( Based on Windows 98 )
The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)
First, click on “Settings” on the Windows start menu.
While “Settings” is highlighted, move the cursor so that “Control Panel” is highlighted.
When the control panel screen appears, click on “Display” and a display dialog-box will appear.
Navigate to the “Settings” tab on the display dialog-box.
➢Only black signal is output from a monitor in PC mode.
The correct setting of size (resolution) is “1024 x 768pixels”.
If a vertical-frequency option exists on your display settings dialog box, the correct value is “60” or “60 Hz”. Otherwise, just click “OK” and exit the dialog box.