Samsung PPM 42S3 manual Adjusting the Picture Settings, Normal Warm1 Warm2 Cool2 Cool1

BN68-00457B-01_ENG 2003.10.23 3:21 PM Page 23

Adjusting the Picture Settings

Your PDP has several settings which allow you to control picture quality.

1Press the MENU button.

Result: The options available in the Picture group are displayed.

2Press the √ button.

3Press the ▲ or ▼ button to select Adjust. Press the √ button.

Result: The Adjust menu is displayed.

4Press the ▲ or ▼ button to select the option (Contrast,

Brightness, Sharpness, Color, Tint-NTSC only) to be adjusted. Press the œ or √ button.

Result: The horizontal bar is displayed. Move the horizontal bar’s cursor left or right by pressing the œ or √ button.

5When you are satisfied with the settings, press the button to store them.

6Press the MENU button.

Result: The options available in the Picture group are displayed again.

7Press the ▲ or ▼ button to select Color Tone. Select the option by pressing the œ or √ button. The color tones are displayed in the following order.

Normal - Warm1 - Warm2 - Cool2 - Cool1

➣If you make any changes to these settings, the picture mode is automatically switched to the Custom.

ENG

	Picture
Mode	œ Dynamic √
Adjust	√
Color Tone	œ Normal √
Size	Wide
Digital NR	œ Off	√
Move	Enter	Return
Adjust (Dynamic)
Contrast		100
Brightness		45
Sharpness		75
Color		55
Move	Adjust	Store
	Picture
Mode	œ Dynamic √
Adjust	√
Color Tone	œ Normal √
Size	Wide
Digital NR	œ Off	√
Move	Enter	Return

23