Samsung MF68-00389A-00 manual Cables & Connections, Audio/Video A/V Jack, Telephone Jack and Cord

Getting Connected

R L V

Note you should use the Telephone line cord which is supplied with the machine. If you are replacing it with the other vendor’s part, it should be minimum AWG #26 or larger gage.

Note that not all cables come with your digital satellite receiver; you may need to purchase additional cables depending on your setup.

Cables & Connections

Audio/Video (A/V) Jack

VCR or other component equipped with external output connectors. (A/V cable is not supplied)

RF Jack and Coaxial Cable (F-type)

The RF jacks on the receiver are labeled SATELLITE IN. Note: Be sure to use RG-6 coaxial cable when connecting from the satellite dish to the Samsung Fliptop powered by DIRECTV®.

(Cable is not supplied)

Telephone Jack and Cord

The telephone line cord is required to connect your Samsung Fliptop powered by DIRECTV® to a land-based telephone line if you choose to subscribe to DIRECTV programming. The phone line connection is used to periodically call DIRECTV. You will need an RJ11-type modulator jack (the most common type of phone jack). This equipment uses the following USOC jack: RJ11c. Note:

Do not connect your receiver to a digital PBX phone system — doing so may permanently damage your equipment and void your warranty.

8Helpful Hardware Reference