Samsung SPN4235 manual Digital Noise Reduction, Setting Auto Power Off

Digital Noise Reduction

If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen.

Setting Auto Power Off

The PDP can be set to turn off automatically if no buttons are pressed for 3 hours after the PDP turns on via the On timer.

Press the MENU button. Press the UP or DOWN

1 button to select “Function”, then press the ENTER button.

2 Press the UP or DOWN button to select “NR”.

				Press the MENU button. Press the UP or DOWN
	Function					Function
Language		English	1 button to select “Function”, then press the ENTER		Language		English
Time				button.	Time
Caption					Caption
NR		Off			NR		Off
Auto Power Off		Off			Auto Power Off		Off
V-Chip					V-Chip
Film Mode		Off			Film Mode		Off
Move	Select	Menu			Move	Select	Menu
			2	Press the UP or DOWN button to select “Auto
	Function					Function
Language		English		Power Off”.	Language		English
Time					Time
Caption					Caption
NR		Off			NR		Off
Auto Power Off		Off			Auto Power Off		Off
V-Chip					V-Chip
Film Mode		Off			Film Mode		Off

Move Select Menu Move Select Menu

3 Press the LEFT or RIGHT button to select “On”.

	Function		3	Press the LEFT or RIGHT button to select “On”.	Function
Language	English			Language		English
Time				Time
Caption				Caption
NR	On			NR		Off
Auto Power Off	Off			Auto Power Off		On
V-Chip				V-Chip
Film Mode	Off			Film Mode		Off
Move	Select	Menu		Move	Select	Menu

4 Press the MENU button to exit. 4 Press the MENU button to exit.

Note

• If the Off timer is set, Auto Power Off will not function.

• The power will be turned off automatically after 15 minutes if the PDP is ON and there is no input signal. (For instance, if you select a channel without a signal while in TV mode or when there is no input signal after selecting an output signal)

86 87