Network Connection
You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.
Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first attach a Samsung Wireless LAN Adapter (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the USB port on the back of your TV. See the illustration below.
The LAN Port on
TV Side Panel
Wireless IP sharer
(wireless router having
lheWall
DHCP SeNer)
LAN Cable
Samsung'sWireless LAN adapter supports the IEEE 802.11a, IEEE 802.11 b, IEEE 80211g, and IEEE 802.11 n wireless communication protocols. For your TV to connect to your network, the wireless router or modem you use must also support one of these protocols. The fastest of these protocols is IEEE 802.11 n.
Most wireless network systems incorporate a security system that requires devices that access the network through an access point or wireless router (typically a wireless modem or router) to transmit an encrypted security code called an access key.
For regular connections, your TV is compatible with the following security protocols:
•Authentication Mode OPEN, SHARED, WPAPSK, WPA2PSK
•Encryption Type WEP, TKIP, AES
Configuring the Network Connection - Wireless
The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to configure network connections automatically. If your have a Static IP network, see your user'smanual for configuration instructions.
To configure your network connection for a network that uses DHCP, follow these steps:
1.Connect your TV to your network as shown in the illustrations above.
2. Turn on your TV, press the MENU button on your remote, and then select Network
3. Select Wireless (General), and then press ENTER G twice.
4. The Network function searches for available wireless network. When done, it displays a list of the available networks.
5. In the list of networks, press the A or T button to select a network, then select Next and press ENTER G.
6. If you have selected an wireless router that has security, the security key screen appears. Enter the Security key (Security key or PIN), then select Next, and press
ENTERG.
Select a network connection type.
~ When you enter the Security key (Security key or PIN), use AIT I ~/~ buttons on your remote to select numbers and characters. You can also use the number keys on the remote to enter numbers directly.
7. The network connection screen appears and verifies the network connection. When the connection has been verified, the "Internet is connected successfully." message appears.
~ For more detailed information, see "Connecting to a Wireless Network" in the
~ If you want to set the connection manually, select IP Settings on the network connection screen. Set IP Mode to Manual. You must enter the IP Address, Subnet Mask, Gateway, and DNS Server manually.
. English .1~
r_ | _ . : | , . | , |