Samsung PS-50C6HR, PS-42C6HR manual How to Install the Wall Mount Bracket

ASSY-HINGE (LEFT)

How to Install the Wall Mount Bracket

➢This installation guide may be different from the PDP User’s manual. Please refer to the proper installation guide for your product.

Installation Notes

◆Contact a technician for installing the wall bracket.

◆Samsung Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer.

◆This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.

◆The package contents and parts supplied for the wall mount are subject to change without prior notice.

Mounting Kits

◆Please use only the parts and components provided for wall mount installation.

Wall Mount Bracket ASSY-HINGE Screws

Plastic Hanger : 4 EA

1EA LEFT :1EA RIGHT :1EA SCREW : 4 EA

How to assemble the Wall Mount Bracket

1The wall mount bracket is delivered separately. Please tighten the captive screw in the direction of the arrow after assembling the bracket.

Install the Wall Mount Bracket after the screws are securely inserted into the wall.

Captive Screws

Wall Mount Bracket

Separate ASSY-HINGE

into Left and Right. ASSY-HINGE (RIGHT)

Instructions on Securing the SET to the Wall Mount Bracket

➢The exterior of the SET may be different than the picture. (Assembly and installation of the plastic hanger is the same.)

1 Remove the screws from the back of the PDP.	2 Use the screw and assemble the plastic hanger.
	(Please refer to the following picture.)

☛ 1 Please ask the installers to install the wall mount bracket.

2 Please be sure to check if the plastic hanger is completely secured on both the left and right side after hanging the SET on the wall mount bracket.

3 Please avoid catching your fingers while installing and adjusting the angle.

4 Please tightly secure the wall mount bracket to the wall to avoid injury from a falling SET.

continued...

English - 28