Universal Remote Control M1055 manual Using the Master Power KEY, To Program The Master Power Key

Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 18

USING THE MASTER POWER KEY

The Atlas DVR/PVR 5-Device Universal Remote Control has a unique feature that allows you to sequentially turn on or off up to five of your home entertainment devices with a single key press.

NOTE: MASTER POWER (PWR) only works in the CBL mode. If it is not programmed, only the cable converter will turn on or off. In any other mode, pressing MASTER POWER (PWR) once will turn on or off the selected device.

To Program The Master Power Key:

1.On the remote control, press and hold SETUP until the last-selected device key blinks twice, then release SETUP.

2. Enter 9 - 9 - 5. The last-selected device key will blink twice. Then press PWR once.

3.For the first device you want in the power on sequence, press a device key (e.g., CBL) once . Then press PWR once.

4.Repeat step 3 up to four more times to add the second,third,fourth,and fifth device,as desired.

5.To save the settings and exit the program, press and hold CBL once. Next press and hold

SETUP until the CBL key blinks twice, then release SETUP.

To Operate The Master Power Key:

1.After programming, point the remote control at the devices. Press CBL once.

2. Press PWR once to sequentially turn on or off all home entertainment devices.

3.You will see the devices turn on or off according to the programmed sequence.

18