Universal Remote Control M1055 manual Programming Channel Control Lock

Atlas DVR-PVR M1055 8/12/04 4:51 PM Page 15

PROGRAMMING CHANNEL CONTROL LOCK

By default, the remote control’s channel-control capabilities are locked to the cable converter. The affected keys* are

0 ~ 9, CH+, CH-, ENTER, and LAST. This will guarantee that you do not inadvertently change a channel on your TV or VCR. However, you can de-activate this feature to allow full access to these keys in the TV and VCR modes.

*NOTE: This feature does not affect the AUD mode.

To De-Activate Channel Control Lock:

1.On the remote control, press CBL once; it will blink once. Then press and hold SETUP until

the CBL key blinks twice, then release SETUP.

2. Enter 9 -7- 3. The CBL key will blink twice.

3. Press CH- once. The CBL key will blink four times.

4.Now, the remote control will provide TV and VCR channel-control capabilities while in the TV or VCR mode.

To Re-Activate Channel Control Lock:

1.On the remote control, press CBL once; it will blink once. Then press and hold SETUP until

the CBL key blinks twice, then release SETUP.

2. Enter 9 -7- 3. The CBL key will blink twice.

3. Press CH+ once. The CBL key will blink twice.

4.Now, regardless of what mode you select (except AUD), only the channel control capability of your cable converter will be accessible.

15