Toshiba 56HM195 Using the SRS WOWª surround sound feature, Turning off the built-in speakers

Chapter 8: Using the TV’s features

Adjusting the audio (continued)

Using the SRS WOWª surround sound feature

WOW™ is a special combination of SRS Labs audio technologies (SRS 3D, FOCUS, and TruBass) that creates a thrilling surround sound experience with deep, rich bass from stereo sound sources. Your TV’s audio will sound fuller, richer, and wider.

To adjust the WOWª settings:

1.Put the TV in STEREO mode (see “Selecting stereo/SAP broadcasts” on page 84).

2.Press MENU and open the Audio menu.

3.Highlight Advanced Audio Settings and press ENTER.

Audio

Audio Settings

Advanced Audio Settings

Audio Setup

4.Press z or y to highlight the WOW feature you want to adjust, and then press x or • to adjust the item.

Advanced Audio Settings

WOW: SRS 3D		Off
WOW: FOCUS		Off
WOW: TruBass		Low
	Reset	Done

•WOW: SRS 3D — To turn the surround sound effect On or Off.

Note: If the broadcast is monaural, the 3D effect does not work.

•WOW: FOCUS — To turn the vocal emphasis effect On or Off.

•WOW: TruBass — To select the desired bass expansion level (High, Low, or Off ).

5.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

Turning off the built-in speakers

Use this feature to turn off the TV speakers when you connect an audio system to your TV (see “Connecting a digital audio system” and “Connecting an analog audio system” on page 20).

______________

WOW, SRS and symbol are trademarks of SRS Labs, Inc. WOW technology is incorporated under license from SRS Labs, Inc.

To turn off the built-in speakers:

1.Press MENU and open the Audio menu.

2.Highlight Audio Setup and press ENTER.

Audio

Audio Settings

Advanced Audio Settings

Audio Setup

3. In the Speakers field, select Off.

Audio Setup

MTS		Stereo
Language		English
Speakers		On
Optical Output Format		Dolby Digital
	Reset	Done

4.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

To turn on the built-in speakers:

Select On in step 3 above.

Selecting the optical audio output format

Use this feature to select the optical audio output format when you connect a Dolby Digital decoder or other digital audio system to the Optical Audio Out terminal on the TV (see “Connecting a digital audio system” on page 20).

To select the optical audio output format:

1.Press MENU and open the Audio menu.

2.Highlight Audio Setup and press ENTER.

Audio

Audio Settings

Advanced Audio Settings

Audio Setup

3.In the Optical Output Format field, select either Dolby Digital or PCM, depending on your device.

Audio Setup

MTS		Stereo
Language		English
Speakers		On
Optical Output Format		Dolby Digital
	Reset	Done

4.To save the new settings, highlight Done and press ENTER. To revert to the factory defaults, highlight Reset and press ENTER.

86 Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.