Toshiba 57H93 Setting up and using TheaterNet on-screen device control, Setting up TheaterNet

Chapter 6: Setting up your TV

Setting up and using TheaterNet™ on-screen device control

The TheaterNet feature allows you to control many brands of IEEE-1394 and/or infrared remote-controlled A/V devices through your TV using on-screen control icons and the TV’s remote control.

Note:

•Although the TheaterNet on-screen device control feature includes codes for many devices, it may not include codes for some or all of the features on certain devices you wish to control. If you are unable to program the TheaterNet feature to operate your device or some of the features on that device, use the device’s remote control or the controls on the device.

•For IR pass-through device control information, see “Connecting infrared remote-controlled devices to the IR OUT jack” on page 21.

Setting up TheaterNet

All device types except IEEE-1394 require the following setup process before you can control them using the TheaterNet on-screen icons.

All Compatible IEEE-1394 devices are automatically recognized by the TheaterNet feature and do not require setup.

Note: See page 23 for details about the IEEE-1394 ports. If your IEEE-1394 device is not recognized through the IEEE-1394 port or through the TheaterNet feature, it may be possible to set it up for IR pass-through control as an infrared device (see page 21).

To set up TheaterNet device control:

1.Make sure you have properly connected your infrared remote-controlled device(s). See page 21 for details.

2.Press MENU and open the SETUP menu.

3.Highlight INSTALLATION and press ENTER. (A new set of INSTALLATION menu icons will appear on-screen, as shown in step 4).

Setup

Installation

Sleep Timer

On/Off Timer

Digital Tuner Hold • • • • • • • Off

Slide Show Interval • • • 2 Sec

Convergence

4.Open the DEVICES menu, highlight THEATER NET DEVICES, and then press ENTER.

Devices

IEEE1394 Devices

TheaterNet Devices

The TheaterNet Setup menu opens.

TheaterNet Setup
Input	Video 1			Select IR
				device input
Type	None			to configure
Brand	None
IR Code	0 0	0	0	Test
Exit	Save			Reset

5.Using the x • buttons, select the INPUT the device is connected to.

6.Press z and then x • to select the device TYPE.

7.Press z and then x • to select the device BRAND.

8.Press z and then the Channel Number buttons to enter the device IR CODE.

Note: Refer to the TheaterNet device code table on pages 47–49 to find the IR code for your device.

9.Highlight TEST and press ENTER to test whether the device responds to the code.

If the device does not respond to the code, repeat steps 7 and 8 using another code for the same device.

10.When done, highlight SAVE and press ENTER.

To remove a device from TheaterNet:

1.Follow steps 1–5 above.

2.Highlight RESET and press ENTER.

Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. 45