Toshiba 65H93, 57H93 owner manual TV back panel, Demo

Chapter 1: Introduction

Overview of steps for installing, setting up, and using your new TV

Follow these steps to set up your TV and begin using its many exciting features.

1.Carefully read the important safety, installation, care, and service information on pages 2–4. Keep this manual for future reference.

2.Do not plug in any power cords until AFTER you have connected all cables and devices to your TV.

3.If you need to split your TV into two sections during moving or installation, read the “Important Safety Precautions for Split Cabinet Feature” on page 5.

4.Consider the following when selecting a location for your TV:

•Place the TV on the floor only.

•Place the TV in a location where light does not reflect on the screen.

•Place the TV far enough from walls and other objects to allow proper ventilation. Inadequate ventilation may cause overheating, which will damage the TV. THIS TYPE OF DAMAGE IS NOT COVERED UNDER THE TOSHIBA WARRANTY BECAUSE IT IS A RESULT OF MISUSE.

•Read “Installation” on pages 3–4.

5.Remove the demo pin from the G-LINK jack on the back of the TV (see illustration below).

TV back panel

ANT( 75 )

G-LINK DVI/HDCP IN

ANT-1

ANT-2

➚

REC OUT

DEMO

PIN

VIDEO

L

ThisR

Demo

automaticallyAUDIO

Pin

TV

Guide

On

activates

the

Screen

demo.

RETAILERS:

Do not

remove

this

Demo

Removal

Pin.

will

the

disable

automatic

demo.

CONSUMERS:

Remove

this

Demo Pin

and insert

the IR

here

blaster

before

cable

using

your

TV.

6.BEFORE connecting cables or devices to the TV, learn the functions of the TV’s connections and controls (page 10).

7.Connect your other electronic device(s) to the TV (pages 12–25).

8.Connect one of the the enclosed IR blaster cables from your VCR and/or Cable box to the G-LINK jack so you can use the TV Guide On Screen™ one-touch recording feature. See page 25.

9.AFTER connecting all cables and devices, plug in the power cords for your TV and other devices.

10.Install the batteries in the remote control (page 27).

11.See “Learning about the remote control” for an overview of the buttons on the remote control (page 26).

12.Program the remote control to operate your other device(s) (pages 27–33).

13.Turn on the TV and other device(s).

14.Follow the on-screen Quick Connect Guide for assistance in configuring the TV’s settings and setting up the TV Guide On Screen™ program guide. (The Quick Connect Guide starts automatically the first time you turn on the TV.) See page 36 for details.

15.Program channels into the TV’s channel memory (page 42), if you did not already do so during the Quick Connect Guide setup.

16.See “Menu layout and navigation” (page 34) for a quick overview of the TV’s menu structure and navigation (page 35).

17.See Chapter 7 for details on using the TV Guide On Screen™ program guide (if available in your area) (page 53).

18.Set up the TheaterNet™ on-screen device control feature (if applicable to your particular home theater system components) (page 45).

19.See page 80 for details on using the SmartMedia™/SD JPEG picture viewer.

20.See Chapter 8 for details on using the TV’s features.

21.For technical specifications, see page 93.

22.For help, refer to the Troubleshooting Guide on pages 88–92.

23.For warranty information, see page 94-95.

24.Enjoy your new TV!

8 Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.