Toshiba 57H93, 65H93 owner manual Contents

Page 5

Important Safety Precautions for Split Cabinet Feature

(Models 57H93 and 65H93 only)

Toshiba TV models 57H93 and 65H93 have a split cabinet feature that allows disassembly of the cabinet into two sections during installation.

For details, please refer to the insert titled “Disassembly/ Reassembly Instructions for Split Cabinet Feature” that accompanied this owner’s manual in the accessory pack. If you do not have the insert, you can download a copy of it from our Web site (www.toshiba.com/tacp in the U.S.A. or www.toshiba.ca in Canada). If you do not have access to the Internet, call 1-800-631-3811 in the U.S.A. or 1-800- 268-3404 in Canada.

WARNING: If you split the cabinet for any purpose, NEVER energize the bottom section until it is completely and properly installed. Energizing the disassembled bottom section and

subjecting it to intentional misuse (for example, exposing it to a foreign object) creates the potential for an electrical shock hazard that could result in death or serious injury.

CAUTION: If you use the split cabinet feature, ALWAYS handle and treat the top section of the TV cabinet, which contains a glass mirror, with great care. If subjected to excessive mechanical abuse (for example, if bumped or dropped), the mirror may break, creating exposed glass fragments with sharp edges. Contact with these glass fragments may result in injury.

Installation, Care, and Service

CAUTION: The split cabinet feature (models 57H93 and 65H93 only) allows disassembly of the cabinet into two sections during installation. If you use the split cabinet feature, follow these precautions while the two sections of the TV cabinet are disassembled:

1)Always handle and treat the top section of the TV cabinet (with the viewing screen), which contains a glass mirror, with great care. If subjected to excessive mechanical abuse (for example, if bumped or dropped), the mirror may break, creating exposed glass fragments with sharp edges. Contact with these glass fragments may result in injury.

2)Never temporarily locate the disassembled bottom section in an area where it may be exposed to foreign objects or abuse (for example, areas where children may be playing, where items may fall on top of the unit, or where liquids may spill into the unit). Failure to follow this instruction may result in damage to the optic components of the TV.

SUCH DAMAGE IS NOT COVERED UNDER THE TOSHIBA LIMITED WARRANTY.

3)Always keep the top and bottom sections of the TV cabinet in an upright position while disassembled. Failure to follow this instruction may result in damage to the TV, including but not limited to the optic components, cabinet, bezel, and glass mirror. SUCH DAMAGE IS NOT COVERED UNDER THE TOSHIBA LIMITED WARRANTY.

4)Never energize the bottom section of the TV cabinet while disassembled. Failure to follow this instruction could result in death or serious injury.

5)Never place anything on top of the bottom section of the TV cabinet. Failure to follow this instruction may result in damage to the optic components. SUCH DAMAGE IS NOT COVERED UNDER THE TOSHIBA LIMITED WARRANTY.

6)Never store or transport the unit while it is disassembled. Failure to follow this instruction may result in damage to the TV, including but not limited to the optic components, cabinet, bezel, and glass mirror. SUCH DAMAGE IS NOT COVERED UNDER THE TOSHIBA LIMITED WARRANTY.

Contents

 

Important Safety Information

2-5

Chapter 1: Introduction

7

Welcome to Toshiba

7

Features of your new TV

7

Note regarding Quick Connect Guide

7

Overview of steps for installing, setting up, and

 

using your new TV

8

Chapter 2: Connecting your TV

9

TV front panel controls and connections

9

TV back panel connections

10

Overview of cable types

11

About the connections illustrations

12

Connecting a VCR and antenna or Cable TV

 

(no Cable box)

12

Connecting VCR and Cable box

13

Connecting a VCR and satellite receiver

14

Connecting a DVD player S-video video and a VCR

15

Connecting a DVD player with component video

 

and a VCR

16

Connecting two VCRs

17

Connecting a VCR to the REC OUT jacks

17

Connecting a DVI/HDCP device

18

Connecting a camcorder

18

Connecting a digital audio system

19

Connecting an analog audio system

19

Connecting an A/V receiver

20

Controlling infrared remote-controlled devices

 

through the TV (IR pass-through)

21

Connecting IEEE-1394 (Firewire™) video devices

22

G-LINK connection

25

Chapter 3: Using the remote control

26

Learning about the remote control

26

Installing the remote control batteries

27

Using the remote control MODE button to

 

control other devices

27

Remote Control functional key chart

28

Programming the remote control to operate

 

your other devices

30

Using the volume lock feature (8000)

31

Operational feature reset (8900)

31

Multi-brand remote control device codes

32

Chapter 4: Menu layout and navigation

34

Main menu layout

34

Setup/installation menu layout

35

Navigating the menu system

35

Copyright © 2003 TOSHIBA CORPORATION. All rights reserved.

5

 

Page 4 Page 6
Image 5
Page 4 Page 6
Contents 51H93 57H93 65H93 It Makes a Difference Where Your TV Stands Safety PrecautionsIssue Tune Into SafetyAlways place the TV on the floor Important Safety InstructionsInstallation, Care, and Service Or continuous, unplug the power cord When the unit is being turned on orContact a Toshiba Authorized Service Center TV, follow these recommendations and precautionsContents Contents from previous Installing, setting up Features of your new TVUsing your new IntroductionDemo TV back panel4 5 6 7 8 Connecting your TVTV front panel controls and connections For an explanation of cable types, see TV back panel connectionsOverview of cable types Two coaxial cables You will needTo view the VCR From Cable TV or antennaVCR’s audio out jack using the white audio cable only Connecting a VCR and Cable boxTo view basic and premium Cable channels Select the Video 1 video input sourceTo view the VCR or view and record antenna channels Connecting a VCR and satellite receiverTo view basic channels and access the TV’s features Connecting a DVD player with S-video and a VCRTo view premium Cable channels To view the DVD playerOne set of component video cables Connecting a DVD player with component video and a VCRSource on the TV To record a TV program while watching a DVDConnecting a VCR to the REC OUT jacks Connecting two VCRsTo view VCR You will need One set of standard A/V cablesConnecting a camcorder Connecting a DVI/HDCP deviceTo view the camcorder video Select the Video 3 video input sourceConnecting an analog audio system Connecting a digital audio systemHighlight Audio Setup and press Enter One optical audio cableSystem connection example Connecting an A/V receiverDolby Pro Logic surround sound TheaterNet on-screen device control Are on-screen. To access other deviceTo connect the IR blaster cable To control the devicesUsing analog-compatible IEEE-1394 devices Connecting IEEE-1394 Firewire video devicesSupported signals Using TheaterNet on-screen device controlTo edit the IEEE-1394 device information IEEE-1394 device initializationIEEE-1394 device management Chain connection IEEE-1394 device interconnectionHub connection Hub connectionSee Link connectionTo connect to the G-LINK jack Channel Numbers 0-9, 100 directly access channels Using the remote controlLearning about the remote control Device mode control after programming Installing the remote control batteriesTo install the remote control batteries Remote Control functional key chart CBL/SAT Audio VCR CH RTN Press Mode to select the TV mode to control the TV Device code setupPress Mode to select the mode you want to set up Searching and sampling the code of a deviceOperational feature reset Using the volume lock featureRepeatedly press Mode to select CABLE/SAT mode To reset the volume controls to the original device modeCable boxes Multi-brand remote control device codesVCRs Receivers CD playersCassette players Laser disksMain menu layout Menu layout and navigationNavigating the menu system Setup / Installation menu layoutPress Menu to open the menu system To close a menu instantly, press ExitManually starting the Quick Connect Guide assisted setup Starting the Quick Connect Guide assisted setupIf you already set up the TV Guide On Screen system, go to Selecting the menu languageConfiguring the location of your TV Setting up the TV Guide On Screen systemConfiguring your Cable setup Following screen opens. Press Enter to continueConfiguring your VCR setup Cable box code testingDo you have a VCR? Select YES or NO, and then press For G-LINK connection details, seeSee ÒImportant final setup steps,Ó next VCR code testingConfirming your settings Important final setup steps Completing the Quick Connect Guide assisted setupConfiguring the antenna input sources Setting up your TVTo configure the ANT 1 and ANT 2 input sources Selecting the menu languageTo program channels automatically Programming channels into the TV’s channel memoryProgramming channels automatically Manually adding and deleting channels in the channel memory To tune your favorite channels To add and delete channels in the Favorite Channels listsTo clear your favorite channel lists Setting up TheaterNet Setting up and using TheaterNet on-screen device controlTo set up TheaterNet device control To remove a device from TheaterNetTo close the on-screen control icons Using the TheaterNet control iconsPress Exit To view another sourceAmplifiers TheaterNet IR device codesLaser disk players Miscellaneous audio devicesADC Video accessory Hdtv decoder ReceiversSTS Manually adjusting the color Adjusting the color convergenceAutomatically adjusting the color Convergence using TouchFocusTo set the time and date Setting the time and dateChecking system status Viewing the digital signal meterSkip these steps and go to the next TV Guide On Screen system includes the following featuresPanel ad Channel Blue and Green About the TV Guide On Screen menu screensWindows Action buttonsNavigating the TV Guide On Screen system Viewing program listings and descriptions Listings menuInfo windows Channel surfingSetting programs as favorites Direct tuningVideo Window One-touch and VCR Plus+ recordingSort menu Using the Menu Bar to access other menusViewing panel ads and channel ads To open the Sort menuChange system settings Setup menuReview options change the auto display setting Schedule menuMessages menu TroubleshootingPromotions menu Selecting the video input source to view Using the TV’s featuresUsing the digital tuner hold To label the video input sources To clear the video labels Labeling the video input sourcesTuning to the next programmed channel Tuning channelsSwitching between two channels using Channel Return Using SpeedSurf to change to a specific programmed channelSelecting the picture size Press PIC Size on the remote controlNatural picture size To select the picture sizeTheater Wide 2 picture size Theater Wide 1 picture sizeTheater Wide 3 picture size Full picture sizeTo turn off the Auto Aspect feature Using the auto aspect ratio feature 480i signals onlyTo turn on the Auto Aspect feature To set the Cinema Mode to Film Selecting the cinema modeTo set the Cinema Mode to Video To select the display formatUsing the POP double-window feature Using the POP featuresTo display a program in the POP window To close the POP windowAdjusting the size of the main and POP pictures Switching the main and POP picturesFreezing the main picture in the POP double-window To close the still POP windowTo cancel the channel scan without changing the channel Using the programmed channel scan featurePOP double-window aspect ratio To scan the programmed channelsDigital channels will not display in the POP multi-windows Using the favorite channel search featureTo scan and tune your favorite channels Selecting the picture mode Adjusting the pictureAdjusting the picture quality Resetting the picture settingsTo deactivate the ALS To turn on the flesh tone featureTo activate the ALS Resetting the advanced picture settings Using CableClear DNR digital noise reductionSelecting the color temperature Advanced closed captions Using the closed caption modeMuting the sound Adjusting the audioSelecting stereo/SAP broadcasts To listen to stereo soundUsing the sub-bass system SBS Adjusting the audio qualityResetting your audio adjustments Using the StableSound featureUsing the SRS WOW surround sound feature Selecting the optical audio output format Turning off the built-in speakersSelecting the Audio OUT sound Viewing digital photos on your TV Using Memory card picture viewerMemory card specifications Memory card care and handling Using the memory card picture viewerTo set the slide show interval To close the picture viewerSetting the sleep timer Setting the ON/OFF timerViewing the demo mode Displaying TV setting information on-screenUnderstanding the auto power off feature Understanding the last mode memory featureEntering the PIN code Using the Locks menuIf you cannot remember your PIN code Changing your PIN codeTo block and unblock TV programs and movies Blocking TV programs and movies by rating V-ChipPress z to highlight Edit Rating Limits and press Edit Rating Limits screen below appearsLocking video inputs Blocking channelsUnlocking programs temporarily Using the front panel lock feature Using the game timerTroubleshooting Sound may be muted. Press Volume If Audio OUT is set to POP in the Audio Setup menuSet to SAP mode Closed caption problemsSetup Questions TV Guide On Screen FAQsOperational Questions Why won’t my VCR turn on?How do I resize or close the Info window? Edid = Enhanced-Extended Display Identification AppendixFor 27 FST Pure and All Larger Television Models Limited United States WarrantyHow to Obtain Warranty Services Limited Canada WarrantyCopyright 2003 Toshiba CORPORATION. All rights reserved Copyright 2003 Toshiba CORPORATION. All rights reserved Index Picture adjustmentsChannel programming Picture-out-picture POPOn/off Remote control03-07 R 23565982 Manufactured by
Top Page Image Contents