Toshiba TLP-T71M, S70 Control terminal, Separately Sold Product, Pin assignment, Interface format

Page 25

Specifications (Continued)

■CONTROL terminal

●Pin assignment

			Pin No.	Signal Name	Description
	7		1	RXD	Receiving data
8	6		2	CTS	Consent to send
			3	DSR	Data set ready
5		3	4	GND	Signal ground
5		3	5	RTS	Request to send
			5	RTS	Request to send
	4		6	N.C	No connection
2	1		7	TXD	Sending data
			8	N.C	No connection

Mini DIN 8 pin connector

●Interface format

1

Communication method

RS-232C, 9600bps, No Parity, Data Length: 8 bits;

Stop Bit Length:

1 bit

2

Communication format

STX (02h)

Command (3Byte)

ETX (03h)

Only 1 command valid per communication.

3

Data format

For input commands, only ASCII-compliant all-uppercase

alphanumeric characters supported.

4

Replies

Acknowledge

ACK (06h)

CR (0Dh)

Data

... Normally ended

ACK (06h)

ESC (1Bh)

... Aborted

No acknowledge

NAK (15h)

If commands are to be sent consecutively, wait for the response from the projector before sending the next command.

●Main Commands

Item	Command
Power on	PON
Power off	POF
Icon display on	MO0
Icon display off	MO1
Auto setting (RGB input)	PAT
Status display on	DON
Status display off	DOF

Item	Command
Computer input select	IN1
Y/PB/PR input select	IN2
Video input select	IN3
S-video input select	IN4
Camera input select	IN5

Note

•Contact your dealer for control cable and other commands.

■Separately Sold Product

Replacement Lamp

Model TLPLV2

Note

•Design, specifications, etc. subject to change without notice for improvements, etc.

48

Image 25

Contents XGA / With Document Camera Others Maintenance Operations Preparations Before UsingSource of Light Power SourcesVentilation USA onlyImportant Safety Instructions Before Using Place and Manner of Installation UsingMoisture Condensation LCD Panel Important Precautions Avoid Volatile LiquidCopyrights DisposalContents Preparations Installing Acrobat ReaderViewing the manual Name Function Camera head Document camera Camera lens ZoomTip resistant bar Camera is used separated from the projectorLoading dry-cell batteries Into the remote control Preparing and using the remote control PlacementOperating the remote control Placement StylesConnection PlacementProjection Distance and Screen Size with optical zooming Before connectionConnecting the power cord Turning the power on and offTurning the power off Turning the power onOperations Basic operationsZooming out the images Using handy featuresFreezing the image Freeze Using handy featuresHow to use the menus Using the menusDisplaying Information Status display Image adjustment menu Using the menuDefault setting menu Display setting menuUninstalling the camera Using the document cameraInstalling the camera Adjust the focus using the focus ring on the camera head Using the document cameraImage projection with the document camera Place the documentMaintenance Air filter cleaningLamp replacement Lens and main unit cleaningLamp replacement Trouble indications Before calling service personnelOthers Before calling service personnel SpecificationsList of general specifications SpecificationList of supported signals RGB signals SpecificationsList of supported signals Y/PB/PR signals List of supported signals Video, S-Video signalsControl terminal Main CommandsSeparately Sold Product Pin assignment