Toshiba P503DL service manual VN5 Write

Table 4 : SERVICE MODE (Command to be in SERVICE MODE )

Item Contents Key(CMD**)

0User picture effect Memory User Memory read out

0		+ 1-9	Show or update Mag pattern 1 -9		VN0
	1		Switches OSD mute on or off		VN1
	2		Screen Mode Lock		VN2
			Switching force timing
			0: no force timing
			A: force timing A
			B: force timing B
			C: force timing C
			D: force timing D
			E: force timing E
	3		Freeze on or off		VN3
	4		Interpolation Filter selection A-B-C-D-E		VN4
	5		Aspe ct ratio switch 4:3 or 16:9		VN5
	WRITE		Memories adjusted data		VWR
	CALL		ON screen menu on or off	DSP	DON	DOF
	ADJUST		Exits SERVICE MODE (return to ADJUST MODE )	AJS	AJY
Table 5 : SPECIAL MODE (Command to be used in SPECIAL MODE )
	Item		Contents	Key(CMD**)
	1		Auto -adjust, on-off	R A1	VN1
	2		Last timing forced lock, on-off	R A2	VN2
	3		Frame lock on-off at SEGA60/Tri-F60 or V.S.X@60Hz	R A3	VN3
	4		Firmware version indication	R A4	VN4
	6		EEPROM reset time indication	R A6	VN6
	7		PIP on-off	R A7	VN7
	8		OSD color change to white( default )	R A8	VN8
	9		Set power on delay from 0 to 4.0 seconds	R A9	VN9
	A		Change OSD color to red	RAA	VNA
	B		Change OSD color to green	R AB	VNB
	C		Change OSD color to blue	R AC	VNC
	D		Display Software Version	R AD	VND
	E		Display elapse time and lamp replacement history	R AE	VNE
	F		Display lamp timer	RAF	VNF
	STD		Resetting present lamp timer (uses after F, then Write)		VST
	WRITE		Memorizes adjusted data		VWR
	CALL		Onscreen display on or off	DSP	DON	DOF
	ADJUST		Exits SPECIAL MODE (return to ADJUST MODE )	AJS	AJY
Table 6 : ID MODE (Command to be used in ID MODE )
		Item	Contents	Key(CMD**)
	ID.CLR		Clearing ID		IDC
	ID.SET		Setting ID		IDS
	ID.ALL		Input *		IDA
	0		Input 0		VN0
	1		Input 1		VN1
	2		Input 2		VN2
	3		Input 3		VN3
	4		Input 4		VN4
	5		Input 5		VN5
	6		Input 6		VN6
	7		Input 7		VN7
	8		Input 8		VN8
	9		Input 9		VN9
	A		Input A		VNA
	B		Input B		VNB
	C		Input C		VNC
	D		Input D		VND

38