CONNECTIONS
Choosing a Connection
The following pages show examples of connections commonly used to connect the DVD player with aTV and other components. Refer to yourTV, VCR, or Dolby Digital Receiver owner’s manual for more information on hooking up your specific components.
DVD Player + TV without A/V Input Jacks | 10 |
If your television only has antenna (RF) inputs, you will need to get an RF converter in order to connect the DVD player.This connection gives you a good quality picture and sound.
DVD Player + TV with A/V Input Jacks (and/or S-Video) .. 11
If your television has A/V input jacks use them to connect your DVD for better quality picture and sound. (For the best quality picture, use the
DVD Player + Stereo Amplifier/Receiver + TV | 12 |
If your television has an
DVD Player + TV + VCR | 13 |
If you want to include a VCR in your connection scheme, this shows you one possible connection.
Finishing the Connection
After you have connected all of the components, you will need to attach the power cord, and set the
Don’t Forget to Plug It In
After you’ve connected the components, don’t forget to plug in the DVD player.
9