CONNECTIONS
DVD Player + TV without A/V Input Jacks
(Good Picture and Sound Quality)
TV
ANT IN
RF MODULATOR
DVD
PLAYER
Video | RF Out |
| |
Audio (L) | Ant In |
|
R
L
AUDIO VIDEO
CABLE
OR
To Connect the DVD Player
If you do not have audio/video input jacks on your television, you need to use an RF modulator, and a splitter.
1.Connect one end of the A/V cables to the Left Audio and the Video outputs on the DVD player.
2.Connect the other end to the corresponding inputs on the RF modulator.
3.Connect the
4.Connect the output from the modulator to the antenna input on your television.
CAUTION
Do not stack electronic components or other objects on top of the DVD player. See Safety Information, inside front cover.
To Watch DVD
Tune your television to RF modulator output channel (the modulator should have a CH 3/4 switch to indicate the output channel).
NOTE:
•You may need to adjust the A/B switch on the RF modulator to watch television programming.
Consult the owner’s manuals of the additional components you are connecting for more detailed connection information for those particular components.
10