SETTING UP THE VCR
The VCR begins scanning for the available
To Change the Signal Type
1.Press MENU to display the VCR MAIN MENU.
2.Press 4 to display the CHANNELS menu.
3.Press 3 to change the Signal Type between CABLE and
ANTENNA.
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: CABLE
4 VCR Plus+ Channel List
0 Exit
To Add or Remove Channels
You may want to add or delete channels after you Auto Channel Search, especially if some of the channels have weak signals or you don’t want to watch them.
1.Press MENU to display the VCR MAIN MENU.
2.Press 4 to display CHANNELS menu.
3.Press 2 to display the ADD/REMOVE CHANNELS menu. Use the CHANNEL up or down, or number buttons, to go to the channels you want to remove or add.
ADD/REMOVE CHANNELS |
| ADD/REMOVE CHANNELS | ||
Channel 115 |
| Channel 115 | ||
is presently ADDED |
| is presently REMOVED | ||
Press | CLEAR to remove |
| Press INFO | to add |
Press | MENU to exit |
| Press MENU | to exit |
|
|
|
|
|
Time and Date
Before you set the time and date, set the Auto DST (Daylight- Saving Time) feature to ON or OFF for your area.
Selecting Channels
The CHANNEL up and down buttons access those channels active in your VCR channel list.
You can still access channels not in the channel list by using the number buttons on the remote control.
10