GE VG4061 manual Timer Recording with VCR Plus+, Setting Up the Channel List

RECORDING

6.Review the information to make sure it is correct, and then press MENU to save.

Program 1 (One time)

Channel	03 Cable
Start Time	08:00 PM
End Time	09:30 PM
Start Date	10/24/97 Fri
Tape Speed	SLP
	1=SP 2=SLP

Press CLEAR to correct Press MENU to save

Program 1 has been saved

Remember to insert a recordable tape and turn the VCR off before the program start time.

Press MENU to continue

Timer Recording with VCR Plus+

You can use VCR Plus+ to simplify timer programming if you have cable TV and don’t receive all channels through a cable box or if you get your TV signal off-air.

Setting Up the Channel List

If you did not set up the VCR Plus+ channel list, you can do it now.

1.Display the CHANNELS menu from the VCR MAIN MENU.

2.Display the VCR Plus+ Channel List screen.

3.Go to Setting Up Your VCR if you need more information on setting up your VCR Plus+ Channel List.

Using VCR Plus+

1. Press MENU to bring up the VCR MAIN MENU.

VCR MAIN MENU

1 VCR Plus+

2 Timer Recordings

3Time

4Channels

5Preferences

6Language

0Exit

2.Press 1 to display the VCR PLUS+ menu.

VCR PLUS+

Enter pluscode number (from TV listing)

-

Press MENU to cancel

VCR MAIN MENU

1 VCR Plus+

2 Timer Recordings

3Time

4Channels

5Preferences

6LanguageCHANNELS

1	Auto Channel Search
2	Add/Remove Channels
0 Exit			CABLE
3	Signal Type:
4	VCR Plus+ Channel List
	VCR+ Channel		My Channel
	5		46
0	Exit 4		--
	3	-> -> -> 23
	2		--
	1		--

Use CH+/- to select

Press 0-9 to change

Press MENU to save

VCR Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation.

26