Setting Up the VCR
Startup
5.Select the language/Seleccione el idioma/ Sélectionner la langue.
The VCR displays the
A. Press MENU on remote to display the VCR MAIN MENU.
B. Press 6 to display the LANGUAGE or IDIOMA or LANGUE menu. (English: LANGUAGE; Spanish: IDIOMA; French: LANGUE).
•Press 1 to have the menus displayed in English (Ingles).
•Press 2 to have the menus displayed in Spanish (Español).
•Press 3 to have the menus displayed in French (Français).
6.Place channels in the VCR’s memory.
The AUTO CHANNEL SEARCH feature memorizes the channel list available through your signal
Wait until the channel numbers stop changing. This takes about one to two minutes. The TV tunes to the lowest channel found. Pressing CHANNEL up or down selects only the active channels.
A. Press MENU to display the VCR MAIN MENU on the TV screen. If this menu does not appear:
•Make sure the TV is tuned to same channel as the CH 3/4 switch on the VCR or the TV’s video input (refer to TV’s manual).
•If you use a basic hookup, check the VCR indicator in display panel — it should be on. Press TV•VCR to turn it on.
•Check the connections.
B. Press 3 to display the CHANNELS menu.
C. Press 1 to begin AUTO CHANNEL SEARCH.
The VCR automatically selects the CABLE (cable TV) or ANTENNA signal. For cable connection, 125 channels are searched; for the antenna connection, 69 channels are searched.
To change the Signal Type:
A. Follow steps
B. Press 3 to switch the Signal Type between CABLE and
ANTENNA.
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
4Preferences
5 Audio
6 Language
LANGUAGE
Select a language.
1➛English
2Español
3 Français
Press MENU to continue
VCR MAIN MENU
1 Timer Recordings
2 Set Clock
3 Channels
4Preferences
5 Audio
6 Language
0 Exit
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type: ANTENNA
4 Cable Box Setup
0 Exit
AUTO CHANNEL SEARCH
Now scanning channel 14
Press any key to cancel
8