Using the Remote Control
Buttons
POWER
TV•VCR DISPLAY
REW PLAY FF
STOP
RECORD PAUSE SEARCH
TRACKING CHANNEL
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
| 0 |
|
MENU | CLEAR INPUT | PREV CH |
SPEED | - SLOW + | F.ADV |
CHANNEL Up or Down
Selects next higher or lower channel in the VCR’s channel memory.
CLEAR
Resets time counter to 0:00:00.
Allows you to change entries when setting the clock or VCR for a timer recording.
DISPLAY
Shows VCR operating displays on the TV screen.
Displays the time counter.
F.ADV (Frame Advance)
Lets you view one frame with each press of the button when tape is in
FF (Fast Forward)
Fast forwards the tape when the VCR is stopped.
Searches the picture in forward motion during playback.
INPUT
Turns the line input on or off. Line input refers to the signal coming from the component connected to the audio/video jacks on the back of the VCR.
MENU
Displays the VCR MAIN MENU on the TV screen.
Removes a menu from the screen.
Numbers (0 through 9)
Select a channel up to 99 by pressing two numbers.
Select a cable channel over 99 by pressing and holding 1 until 1– – appears on the screen. Then press the other two numbers.
POWER
Turns the VCR on and off.
PAUSE
Pauses action for viewing during playback.
Pauses recording to prevent recording of unwanted scenes.
PLAY
Plays a tape.
PREV CH (Previous Channel)
Switches between two channels.
Select one channel and then select another. Press PREV CH to switch between the two channels.
RECORD
Starts VCR recording.
Used for one touch recording. See page 22.
REW (Rewind)
Rewinds the tape when the VCR is stopped.
Searches the picture in reverse motion during playback.
SEARCH
Displays INDEX, TIME, and GO-TO SEARCH menus on TV.
Advances tape 60 or 120 seconds during playback.
SLOW – or +
Used for
SPEED (Tape Speed)
Selects a recording speed (SP or SLP).
STOP
Stops the normal functions such as record, playback, rewind, fast forward, and pause of the VCR.
TRACKING Up or Down Lets you manually reduce the streaks that may appear on the picture during play or pause.
Reduces picture “jitter” during
TV•VCR
Switches the picture signal so
that it either comes from the VCR or the TV channel. See page 10.
11