Important Safeguards

For your protection, please read these instructions completely, andkeep this manual for future reference.

Carefully observeand comply with all warnings, cautions and instructions placed on the set or described in the operating instructions or service manual.

WARNING

To guard againstinjury, the following basic safety precautions shouldbe observed in the installation, use and servicing of the set.

Use

Power Sources

This set shouldbe operated only from the type of power source indicated on the serial/modelplate. If you are not sure of the type of electrical power supplied to your home, consult your dealer or

local power company. For those sets designed to operate from battery power, refer to the operating instructions.

Grounding or Polarization

This setis equipped with a polarized AC power cord plug (a plug having one blade wider than the other), or with a three-wire grounding type plug (a plug having a third pin for grounding). Follow the instructions below:

For the set with a polarized AC power cord plug

This plug will fit into the power outlet only one way. This is a safety feature. If

you are unable to insert the plug fully %f!% into the outlet, try reversing the plug. If

the plug still fails to fit, contact your electrician to have a suitable outlet installed. Do not defeat the safety purpose of the polarized plug by forcing it in.

Alternate Warning for the set with a three- wire grounding type AC plug

This plug will only tit into a grounding- type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to have a suitable outlet

installed. Do not defeat the safety purpose of the grounding plug.

Overloading

Do not overload wall outlets, extension cords or convenience receptacles beyond their capacity, since this can result in fire or electric shock.

Always turn the set off when it is not being used. When the set is left unattended and unused for long periods of time, unplug it from the wall outlet as a precaution against the

possibility of an internal malfunction that could create a fire hazard.

If a snapping or popping sound from a TV

set is continuous or frequent while the TV ,,& +, is operating, unplug the TV and consult

your dealer or service technician. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being turned on or off.

Object and Liquid Entry

Never push objects of any kind into the set through the cabinet slots as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the set.

Attachments

Do not use attachments not recommended by the manufacturer, as they may cause hazards.

Cleaning4

Clean the cabinet of the projection TV with a dry soft cloth. To remove dust from the screen, wipe it gently with a soft a cloth. Stubborn stains may be removed with a cloth slightly dampened with

solution of mild soap and warm water. Never use strong solvents such as thinner or benzine for cleaning.

If the picture becomes dark after using the projection TV for a long period of time, it may be necessaryto clean the inside of the projection TV Consult qualified service personnel.