Sony KP-6lHS20 manual Programming the Remote Control, 303, 302, Sony Switch Position

Programming the Remote Control

The remote control is preset to operate Sony brand video equipment.

-- I”.. I

Sony		Switch Position	l+&ram~inable
Equipment		on Remote Control	Code	Number
Beta, ED Beta VCRs		AV1	303
8 mm VCR		AV2	302
VHS	VCR	AV3	301
DVD	Player	DVb	751	-

If you have video equipment other than Sony brand that you want to control with the projection TV’s remote control, use the following procedures to

From the “Manufacturer’s Codes” listed on page 67, select the three-digit code number for the manufacturer’s code for your component. If more than one code number is listed, start with the number listed first. Use the code number to complete the following procedure.

-3

-4

-5

To program a cable box or a satellite receiver

1 Open the panel of the remote control.

2 PressCODE SET inside the panel.

3 Close the panel and press SAT/CABLE (FUNCTON).

4 Enter the three-digit manufacturer’s code number using the O-9buttons. 5 Press ENTER.

6 To check if the code number works, aim the projection TV’s remote control at the component and press the green POWER button that corresponds with that component. If it responds, the programming is completed. If not, try using the other codes listed for that manufacturer.

(Continued)

65