GE 24999 instruction manual Setup

Page 11

Setup, cont.

Resetting Volume/Mute Control to Factory Defaults (VOL/MUTE RESET) This resets Volume/Mute control back to its Factory default settings.

1.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.

2.Press the down navigation button until SYSTEM SETUP is displayed.

3.Press and release OK. VOL/MUTE SETUP is displayed.

4.Press and release OK. ALL VOL. SET is displayed.

5.Press the down navigation button repeatedly until VOL/MUTE RESET is displayed

6.Press and release OK. CONFIRM RESET is displayed.

7.Press and release OK. PLEASE WAIT is briefly displayed, followed by SUCCESS and the remote returns to normal operation.

Volume/Mute control is now rest to its Factory default settings.

11

Image 11

Contents 24999 Table of Contents Introduction Button Functions Button Functions, DVD/DVR Punch-Through FeatureSetup Setup, Press and release OK to confirm selection Code Entry using On-screen Code ListCode Entry Device can be selectedSearching for Codes Press the Channel UP button or POWER, or Play for VCRsCode Identification Feature Code Entry,Volume/Mute Control and Punch-Through Feature System Setup OptionsSetup, Setup, Setup, To clear a TV Sleep Timer Zzz in normal display Timer SetupSetting and Clearing a TV Sleep Timer TV Sleep Setup To set a TV Sleep Timer no Zzz in normal displayTo clear a Timer Timer Bell in normal display Remote Code LearningTips On Learning Learning Notes Tips On Learning,Tips On Learning, Learning Commands To Clear all Learned Commands under a mode Clearing CommandsRemote does not operate your product TroubleshootingDay Limited Warranty Remote does not operate some features of your productUniversal Remote