GE 24999 instruction manual Clearing Commands, To Clear all Learned Commands under a mode

Page 19

Clearing Commands

To Clear all Learned Commands under a mode

Clearing learned commands is helpful if, for example, you replace your CD player with another brand or model. If you had learned a feature from your old CD player’s original remote on to this remote (such as RANDOM PLAY), that feature would no longer work for your new CD player. Should you wish to remove or clear one or more “learned” commands, follow the steps below:

1.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.

2.Press the down navigation button repeatedly until LEARN SETUP is displayed. Press and release OK. MODE LEARN is displayed.

3.Press the down navigation button until MODE CLEAR is displayed. Press and release OK.

4.MODE KEY? is displayed. Press and release the desired Mode button (TV, VCR, DVD, etc.).

5.CONFIRM CLEAR is displayed. Press and release OK.

6.PLEASE WAIT is briefly displayed followed by SUCCESS and the remote exits Setup Mode and returns to normal operation.

Master Clear - To Clear all Learned Commands under all modes (recommended on first time Learning)

1.Press and hold the SETUP button until CODE SETUP is displayed (takes about 3 seconds), then release the SETUP button.

2.Press the down navigation button repeatedly until LEARN SETUP is displayed. Press and release OK. MODE LEARN is displayed.

3.Press the down navigation button repeatedly until ALL LEARN CLEAR is displayed. Press and release OK.

4.CONFIRM CLEAR is displayed. Press and release OK.

5.PLEASE WAIT is briefly displayed followed by SUCCESS and the remote exits Setup Mode and returns to normal operation.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 24999 Table of Contents Introduction Button Functions Button Functions, DVD/DVR Punch-Through FeatureSetup Setup, Press and release OK to confirm selection Code Entry using On-screen Code ListCode Entry Device can be selectedSearching for Codes Press the Channel UP button or POWER, or Play for VCRsCode Identification Feature Code Entry,Volume/Mute Control and Punch-Through Feature System Setup OptionsSetup, Setup, Setup, To clear a TV Sleep Timer Zzz in normal display Timer SetupSetting and Clearing a TV Sleep Timer TV Sleep Setup To set a TV Sleep Timer no Zzz in normal displayTo clear a Timer Timer Bell in normal display Tips On Learning Code LearningRemote Tips On Learning, Tips On Learning,Learning Notes Learning Commands To Clear all Learned Commands under a mode Clearing CommandsRemote does not operate your product TroubleshootingDay Limited Warranty Remote does not operate some features of your productUniversal Remote
Top Page Image Contents