Cable Box Only
Before connecting a cable box, see “About Using CableCARD” on page 17.
For best results, use this connection if:
❑Your cable company scrambles all channels, which requires you to use a cable box.
❑You do not have a VCR. (If you have a VCR, see pages 24 and 26.)
With this connection you can:
❑Use the TV remote control to change channels coming through the cable box to the TV’s VHF/UHF jack. (You must first program the remote control for your specific cable box.)
To connect the cable box
1Connect the CATV cable to the cable box’s input jack.
2Use a coaxial cable to connect the cable box’s output jack to the TV’s VHF/UHF jack.
CATV |
| Coaxial cable | VHF/UHF | TV |
cable |
|
|
| |
1 |
| 2 |
|
|
IN |
| OUT |
|
|
| Cable box |
|
|
3Run Auto Program, as described in “Setting Up the Channel List” on page 43.
Notes on Using This Connection
To Do This ... | Do This ... |
Use the cable box | Tune the TV to the channel the cable box is set to (usually channel 3 or 4) |
| and then use the cable box to switch channels. |
|
|
Set up the TV remote control | Program the remote control. See “Programming the Remote Control” on |
to operate the cable box | pages 50. |
|
|
Activate the remote control to | Press SAT/CABLE FUNCTION. |
operate the cable box |
|
|
|
Setup
SETUP
SETUP
SETUP
SETUP
21