Setup
SETUP
Satellite Receiver and VCR
Using
S VIDEO jacks?
See page 23.
To connect a satellite receiver and VCR
1Connect the CATV cable to the single (input) jack of the splitter.
2Use a coaxial cable to connect one of the splitter’s two output jacks to the TV’s CABLE jack.
3Use a coaxial cable to connect the splitter’s other output jack to the satellite receiver’s VHF/UHF input jack.
4Connect the satellite antenna cable to the satellite receiver’s satellite input jack.
5Use a coaxial cable to connect the satellite receiver’s VHF/UHF output jack to the VCR’s VHF/UHF input jack.
6Use an A/V cable to connect the satellite receiver’s A/V output jacks to the TV’s A/V input jacks.
7Use an A/V cable to connect the VCR’s A/V output jacks to the TV’s A/V input jacks.
8Run Auto Program, as described in “Setting Up the Channel List” on page 43.
TV
CATV cable
Coaxial cable
A/V cable
A/V cable | 7 |
|
Splitter (not supplied)
Satellite antenna cable
Coaxial cable
Satellite receiver
| Cables are often | |
| ||
Coaxial | Connect red to red, | |
white to white, etc. | ||
cable | ||
|
VCR
30