Hitachi P42A01 Basic Operation Basic TV functions, Stereo reception with the built-in tuner

Page 21

BASIC OPERATION (continued)

Basic TV functions

Channel selection

With the 10 Number Buttons.

Example:

No. 2: Press 2. The station stored in the 2nd store position will appear.

No. 29: Press 2 and within 2 seconds, press 9. The station stored in the 29th store position will appear.

Press P + or to change to the program forward or backward. The changing takes approx. 2 seconds.

QuickView

Q. VIEW button allows you to go back to the last selected channel or input source.

Volume adjusting

Press + or to adjust the volume. The volume level indicator disappears after 4 seconds.

MUTE

Press . The sound will be cut off. MUTE will display on the screen for approx. 4 seconds.

The muting can be released by pressing

again or

+ or .

DISPLAY

Press . Channel number, picture size setting, clock (in case of the TV program which has a Teletext time data), etc. will appear for approx. 4 seconds.

STATUS

Press STATUS. The clock and program information will appear, if the information is currently available.

Still picture

Press to make a still picture. To cancel the still picture, press again.

NOTE

If the built-in tuner does not receive any signal (e.g. if no aerial is connected or if the broadcast transmission stops) during TV operation, this unit will switch to standby after approx. 15 minutes.

Stereo reception with the built-in tuner

The built-in tuner can receive and distinguish NICAM Stereo broadcasts automatically, provided the NICAM setting in the menu is set to “AUTO”.

NICAM stereo sound reception:

Select NICAM AUTO or OFF (in Audio menu on 24 ). Select OFF if you do not want to receive NICAM sound.

When NICAM reception is available, one of the following indications will be displayed. “NICAM ST” appears for approx. 4 seconds when a NICAM STEREO broadcast signal is

received.

“NICAM ” appears for approx. 4 seconds when a NICAM MONO A broadcast signal is received.

“NICAM / ” appears for approx. 4 seconds when a NICAM MONO A and MONO B broadcast signal is received.

This will be displayed for approx. 4 seconds when “NICAM OFF” is selected in the menu screen.

A2 Stereo reception

“STEREO” illuminates for approx. 4 seconds when a STEREO broadcast signal is received.

NOTE

In case of bad reception, the stereo sound also can be disturbed.

Adjusting the NICAM/A2 stereo sound

Pressing alternates between the two different audio channels (when applicable).

NICAM 2-channel sound reception

A2 2-channel sound reception

NOTE

Sometimes if reception is poor, the NICAM/A2 stereo sound may not be received correctly. In case of 2 channel sound reception, you can select the desired sound with .

20

Downloaded From TV-Manual.com Manuals

Image 21
Contents Model Name P42A01 English Important Safety Instructions ContentsAbout This Manual IntroductionTrademark Credits About SoftwareSafety Precautions About the SymbolsImportant For United Kingdom Do not remove cover, or modify the product Safety PrecautionsDo not place the unit at a dusty place Cleaning and Maintenance PrecautionsCharacteristics of Image Retention About Plasma Display PanelImage Retention of Plasma Display Panel Supplied Accessories FeaturesMain Unit Component NamesComponent Names Remote Control Remote Control Batteries Installation Handling the Remote ControlPreparation Read Safety Precautions 4 to 7 carefully besides this Preparation Safety Precaution on Main Unit InstallationAnti-Tumble Measures Securing to a wall or pillarConnecting Procedure ConnectionTerminal Positions DVD player Connection Connecting ProcedureConnecting an audio system Connect to a Video camera or games consoleTV Rear bottom view DVD player Details of Hdmi input signals Connecting an Hdmi or a DVI device to the Hdmi inputPC connection Select PC inputConnecting the plug into the wall socket HeadphoneTV Left view Standby mode Turning on the powerAuto setup Basic OperationStereo reception with the built-in tuner Basic Operation Basic TV functionsBasic Operation Conceal stored channels Cancel concealment of channelsPicture format 149Basic Operation Teletext Guide to using the menu system TV Setup OperationVideo menu TV mode Selected Items Setup hintTV Setup Operation Audio menu TV mode TV Setup Operation Setup menu Reset TV Setting PAL60 Auto 43 DefaultVertical Position AV2 OutputAudio menu PC mode TV Setup Operation Video menu PC modeOthers DVD Player / STB Selection Set up hintDVD Selection SAT SelectionSymptom Cause Solution Others TroubleshootingOthers Specifications Signal Input Product SpecificationsPin Input signal GNDProduct Specifications Recommended Signal List Resolution Frequency FrequencyHz KHzWith RGB input UK Guarantee Your Guarantee of Excellence’EMPLOIIABRÉGÉ/GUIDA Iconsultazione Deutsch EnglishFrançais ItalianoItaly