Hitachi P42A01 Vertical Position, AV2 Output, Monitor, AV2 Input, Pal, AV Colour Secam, Panoramic

TV SETUP OPERATION (continued)

Setup menu (continued)

Video Audio Setup

V E R T I C A L P O S I T I O N

AV 2	O U T P U T	T V
AV 2	I N P U T	AV
AV C O L O U R		A U T O
A U T O 4 : 3 D E FA U LT		PA N O R A M I C

: SELECT	: ADJUST
	MENU : RETURN

			–10~+10	When the ZOOM mode is selected as the picture format, you can
VERTICAL POSITION *		1		adjust the vertical picture position.
				Press ϶ then press ϳ or ϴ to adjust the vertical position of the
				picture by up to +10 and downwards by up to -10.
AV2 OUTPUT *2			TV	AV2 will output the channel position that the internal tuner is set to.
			MONITOR	AV2 will output the picture currently displayed on the TV screen.
AV2 INPUT			AV	Composite signal (e.g. from VHS-Video recorder).
			S-VIDEO	S-Video signal (e.g. from DVD player with S-Video output).
			AUTO	The AV Colour setting only applies when viewing devices connected
				to the AV inputs.
			PAL
AV COLOUR *3			SECAM
			NTSC4.43
			NTSC3.58
			PAL60
AUTO 4:3 DEFAULT *4			4:3	This option selects the default way that a 4:3 signal is shown - either
				as normal “4:3” or expanded in the “PANORAMIC” mode.
			PANORAMIC
SIDE PANEL COLOUR			GRAY	You can change the color of side bars showing up in 4:3 mode. It is
				recommended to set GRAY to reduce image retention.
			BLACK
SCREEN SAVER			ON	This is one of the initiatives to reduce image retention by moving the
				displaying screen slightly at interval.
			OFF
INVERSION				The picture is displayed alternately between positive image and
				negative image to reduce the risk of phosphor burn-in of the screen.
				This function is effective for a still pattern image.
SCREEN WIPE				Press ϶. MENU disappears and the picture showing on the screen
				will be replaced with a white screen. The screen will return to normal
				when any button is pressed.
RESET TV SETTING				Reset all adjustment items to the factory preset values.
NOTE
*1	You cannot move the picture vertically in any of the other picture format.
*2	This determines whether the AV2 outputs the signal from the internal tuner or whatever input is shown on the screen.
	Please note that AV1 is fixed to the internal tuner. So, you cannot select the output-signal. AV1 always outputs the signal from the
*3	internal tuner.
	PAL is the colour system used in UK, Germany, etc. NTSC 3.58 is used in the USA. PAL 60 is used in the UK by some video
	recorders, when playing an NTSC recording on a PAL system TV set.
	Different DVD players produce different types of output signal according to the exact model, such as PAL, SECAM, NTSC 4.43,
	NTSC 3.58 and PAL 60.
	However the best type of signal to use is RGB, so ideally you should select this type of output signal in the DVD player’s menu
*4	system, and connect the DVD player to the TV with a SCART lead.
	AUTO 4:3 DEFAULT is available only for AUTO picture size setting.
*4	In HDMI or COMPONENT mode, AUTO 4:3 DEFAULT is available only for 480i/576i mode.

26

Downloaded From TV-Manual.com Manuals