ASSEMBLING AND PREPARING 13
Setting up the TV
You can mount your TV to a wall or attach the stand if you wish to place the TV on an entertainment center
or other furniture.
Attaching the stand
If you are not mounting the TV to a wall, use the following instructions to attach the stand.
CAUTION
yyWhen attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect the screen from scratches.
yyMake sure that the screws are fastened tightly. (If they are not fastened securely enough, the TV may tilt forward after being installed.)
yyDo not tighten the screws with too much force; otherwise they may be damaged and come loose later.
NOTE
yyRemove the stand before installing the TV on a wall mount by performing the stand attachment in reverse.
1 | 2 |
| 4 EA |
Stand Body | M4 x 20 |
| |
| Front |
Stand Base
3
4 EA
M4 x 16
or
2 EA 
2 EA
Tighten the two of these four screws and the two Torx plus star head screws
(provided as parts of the TV) to secure the TV. Tighten the two Torx plus star head screws with a star head driver bit (not provided as parts of the TV).