SPEAKER WBRlNG CONFlGlJRAVlONS (per pair of channels)
STEREO | MONO | MIXED MONO |
Use L & R inputs | Use Right input only | Use L & R inputs |
STEREO MONO @ S T E R E O MONO m STEREO
SWITCH SETTINGS (bottom of amp)
For each pair of’channels, there are two switches (one on 60.2) accessible from the bottom of the amplifier.
Mono/Stereo Switch: Set to “Mono” to bridge one pair of channels into a single channel. Only Right channel input is active. When in “Stereo,” a mono channel can be driven using Left - & Right + speaker outputs.
Crossover Switch (Granite 120.4, Granite 180.6): Defeatable high or low pass crossover. Frequencies are set at 150 Hz, 12 dB/octave on the high pass and 75 Hz, 12 dB/octave on the low pass.
Following are several possible system configurations driven by a single or two bridged Granite amplifiers.
1.Granite 60.2
2 Channel Input /
2 Channel Output
AMPLIFIER
HEAD UNIT
J. R
MONO STEREO STEREO
0
+‘I_ +.L _
SPEAKERS
6