GRANIlE120.4
1 | 5 | ’ | 6 | ‘ 7 8 |
|
|
| 0 | |
| Side | View |
|
|
| CflOnllOlS3UldA |
|
|
| Channets 1 and 2 |
| |||
MONO | r~~oi | MONO | r STEREO 7 | ||||||
twut | tnprt |
| twut | tnpur | tnput |
| tnwt | ||
mm Right | FKlm3u | ficm3+4 | FmmRkJht | Ffom1+2 | Fmm3+4 | ||||
1 5 a
u | |
|
1.+I2V - Connected to fuse or circuit breaker, then battery’s positive post.
2.Ground - Main ground connection. Bolt to a clean chassis ground in the vehicle.
3.Remote - Remote
4.LED - indicates amplifier power on.
5.Speaker Du@ut Connections - Channels (1 + 2 
)
6.Input Level - Variable from 100mV to 2.W (Channels 1 + 2).
7.Inputs - Standard RCA style connectors (Channels I+ 2). Right channel only for mono.
8.Speaker Output Connections - (Channels 3 + 4)
9.Input Level
10.Inputs - Standard RCA style connectors (Channels 3 + 4). Right channel only for mono.
11.[underside]Channels 3 + 4 Mono/Stereo (input 3 + 4)/Stereo (input 3 + 4) Switch
MONO position for single channel operation (only right channel is active in Mono). Use either STEREO input position with RCA inputs from Channels 3 + 4.
12.[underside] Channels 3 + 4 Cnwsover - Select either full range or high pass (150H2, 12dB/octave) operation.
13.[underside] Channels 1 + 2 Mono/Stereo (input 1 + 2) / Stereo (input 3 + 4) Switch
MONO position for single channel operation (only right channel is active in Mono). Use “STEREO1+2” for RCA inputs 1+2. Use “STEREO3+4” for RCA input 3+4.
14.[underside] Channels 1 + 2 Crossover - Select either full range or low pass (75H2, 12dB/octave) operation.
15.[underside] Main Fuse - Main power supply fuse, replace only with same value.
4
0