14 | Using the Remote Control |
|
|
Installing the batteries
Install the batteries (AAAx2), matching the polarity indicated inside battery compartment of the remote control.
1Slide the battery cover down.
(Sample Illustration) Remote control - Opening the battery cover
2Insert two AAA batteries.
Make sure to match the polarity marks (+ /
(Sample Illustration) Remote control - inserting the batteries
3Replace the battery cover.
Do not expose batteries to excessive heat such as sunshine, fire, etc.
Dispose of batteries in a designated disposal area.
Always consider the environment when disposing of batteries. Always follow applicable laws and regulations.
If the remote does not operate correctly, or if the operating range is reduced, replace the batteries.
Always replace both batteries with new ones. Never mix battery types or use new and used batteries together.
Always remove batteries from the remote if they are dead or if the remote control is not to be used for an extended period of time.
This prevents battery acid from leaking into the battery compartment.
Using the remote control
For optimum performance, aim the remote control directly at the player and make sure there are no obstructions between the remote control and the player. The maximum operable ranges from the unit are as follows.
-Line of sight: approx. 7 m
-Either side of the centre: approx. 5 m within 30°
-Above: approx. 5 m within 30°
-Below: approx. 5 m within 30°
5 m | 7 m | 5 m |
(Sample Illustration) Remote control effective range