Toshiba BDX5400KC manual System Setting, Cec

Customizing27

Down_samp

Select the digital audio signal sampling frequency. (Only available on Coaxial)

48k: For discs recorded at sampling rate of 48 kHz.

96k: For discs recorded at sampling rate of 96 kHz. 192k: For discs recorded at sampling rate of 192 kHz.

Dolby DRC

Select the Dynamic Range Control (DRC) mode which makes it available to listen to a movie at a low volume without losing sound clarity.

Off: Non-dynamic range compress.

On: Dynamic range compress.

Auto: Adjust the DRC according to input audio.

The setting of Auto is effective for Dolby® TrueHD.

Stereo Down Mix

Select whether to downmix the multi-channel audio into fewer channels.

. Stereo: Downmixes the multi-channel audio into two channel stereo. Choose when the unit is connected to equipment that does not support virtual surround function such as Dolby® Pro Logic.

Surround Encoded (LtRt): Downmixes the multichannel audio into surround compatible stereo. Choose when the unit is connected to equipment that supports virtual surround function such as Dolby® Pro Logic.

System Setting

1In the Setting menu, use the / button to select System and press OK.

2Use the / button to select an option and press OK.

3Press the button or the RETURN button to return to the previous menu.

Screen Saver

The screen saver helps protect the TV screen. You can turn on/off the screen saver mode. On: Sets the screen saver active after approximately 5 minutes without operation.

-The unit will switch to standby mode if there is no operation after the screen saver is engaged for approximately 20 minutes.

Off: Turns off the screen saver mode. The unit will not switch to standby mode automatically.

Disc Auto Play

Turns On or Off the disc automatic playback switching mode.

On: The disc playback automatically after loading.

Off: Turn off disc auto play mode.

CEC

This feature uses CEC (Consumer Electronics Control) technology and allows you to control Toshiba HDMI™ CEC compatible devices from the player’s remote control via the HDMI™ connection.

On: Turns on HDMITM CEC features.

With CEC on, pressing SETTING, PLAY/PAUSE button will power on the TV when the TV is in the standby mode. When you turn the TV off, this player will automatically turn off.

Off: Disables HDMITM CEC features.

Load Default

Resets all settings of the player to initial default state.

- Follow the instructions on the TV screen to confirm the default setting operation.