Toshiba BDX5400KC manual Customizing, Audio Setting, Spdif, Hdmi

26Customizing

Customizing

This section describes the various setting options of this Blu-ray Disc™ and Online Media Player.

If the setup option is greyed out, it means the setting cannot be changed at the current state.

1Press the SETTING button in stop mode to display the setup screen.

2Press OK to enter the Setting menu.

3Use the / button to select an option and press OK.

4Press the button or the RETURN button to return to the previous menu.

(Sample Illustration) General operations settings

Audio Setting

1In the Setting menu, use the / button to select Audio and press OK.

2Press the / button to select an option and press OK.

3Use the / button to select the desired audio setting and press OK.

4Press the button or the RETURN button to return to the previous menu.

SPDIF

When you connect an audio system to the COAXIAL DIGITAL output jack, the options are:

Bitstream: Selects Bitstream output if your receiver SPDIF (Coaxial) IN supports Dolby® or DTS® or PCM audio signal.

PCM: Selects PCM output if your receiver SPDIF (Coaxial) IN only supports PCM stereo audio signal.

Re-encode:Selects Re-encode output if your receiver SPDIF (Coaxial) IN supports Dolby® or DTS® and you want to hear both PIP audio and the movie audio on Blu-ray™ video.

Off: No audio will be output via COAXIAL DIGITAL output jack.

HDMI

When you connect an HDMITM device to the HDMI OUT jack, the available options are:

Bitstream: Selects Bitstream output if your receiver HDMI IN supports Dolby® or DTS® or PCM audio signal.

PCM: Selects PCM output if your receiver HDMI IN only supports PCM audio signal.

Re-encode:Selects Re-encode if your receiver’s HDMI IN supports Dolby® or DTS® and you want to hear both PIP audio and movie audio on Blu-ray™ video.

Off: No audio will be output via HDMI OUT jack.