S E T U P M E N U O P T I O N S
To begin the test, press the ARROW buttons to highlight the “Test Tone” option, press the Enter button to change the test tone status to “On”. Then press ARROW buttons to select a speaker, you will hear the test sounds. To stop the test process, press ARROW buttons to highlight the “Test Tone” option and press the Enter button to switch the status back to “Off”. Please note these test tones only apply on
Speaker Settings
For each speaker in the home theater system, you can set its size, distance and trim level. To configure a speaker, use the LEFT/RIGHT ARROW buttons to move the cursor to highlight the speaker and press the ENTER button. The Speaker Settings menu on the right side of the screen will be activated. In the Speaker Settings menu, use the UP/DOWN ARROW buttons to select a parameter, and then press the ENTER button to change it. To exit the Speaker Settings menu and return to the Speaker Configuration illustration, press the LEFT ARROW button or select the “Exit” option. You can also move on to configure the next speaker by selecting the “Next Speaker” option.
Speaker Configuration
FL |
| C |
| FR | Front Left Speaker | |
|
|
|
| |||
|
|
|
|
|
|
|
| SW |
|
| Size: | Large | |
SL |
|
|
| SR | ||
|
|
|
|
|
|
|
|
|
|
|
| Distance: | 12ft |
|
|
|
|
|
|
|
SBL |
|
|
| SBR | Trim: | 0.0dB |
|
|
|
|
|
| |
|
|
|
|
| Next Speaker | |
|
|
|
|
|
|
|
|
|
|
|
| Exit |
|
| Test Tone |
|
| |||
Test Tone : Off |
|
|
| Down Mix Mode: 7.1Ch |
|
|
|
|
| Configure the front left speaker |
| Exit | |
The following speaker parameters can be configured:
1.Size: The speaker size parameter sets bass filtering control for the speakers. The options are:
•Large – Bass frequencies are passed to the speakers. The bass frequency is set in the “Crossover Frequency” option of the “Audio Processing” section of the Setup menu (see page 70 for details).
•Small – Bass frequencies are not passed to the speakers to reduce possible distortion. If the subwoofer is available, bass frequencies are redirected to the subwoofer.
•On (for subwoofer only) – Specify that a subwoofer is available.
•Off – Speaker for the corresponding position does not exist. Audio for the missing speaker is redirected to other speakers or discarded if redirection is not possible.
NOTE
The front, surround and surround back speakers are configured as pairs. Changes to the size of one speaker will automatically change the other speaker of the pair.
68