R E F E R E N C E S
Picture rolling or | Video system is not supported | When playback is completely stopped, press and hold | 33, 53 |
split picture | by the TV | the P/N button or set the correct TV System in the |
|
|
| Setup Menu. |
|
“No Disc” or | No disc or incompatible disc | Eject disc and check. | 27 |
“Unknown Disc” | loaded in player |
|
|
error | Dirty disc recording surface | Eject the disc and clean any dirt or fingerprints. | 3 |
| Disc not properly loaded | Eject disc and make sure the label side is facing up | 27 |
|
| and the record side is facing down. |
|
| Condensation on the Laser | Turn on the player, eject the disc and leave the player | 2 |
| on for about an hour. |
| |
Remote control | Remote control is out of range | Use the remote control within the effective range. | 8 |
failure | Low battery | Replace the batteries. | 8 |
| Incorrect remote control code | Open the disc tray. Aim the remote at the player. Press | 9 |
|
| and hold the ENTER button on the remote for 5 |
|
|
| seconds to set the remote code. |
|
Temporary | Scratched or damaged disc is | Replace the disc. | 27 |
function failure | used |
|
|
| Some functions are not | Stop playback completely, then try again. | 27 |
| available during playback |
|
|
| Interference from other devices | Identify interference by turning off other devices, and | 2 |
|
| then relocate or replace the offending device |
|
Some Setup | Some setup options cannot be | Fully stop playback, eject the disc and try the Setup | 22 |
Menu items are | changed while a disc is playing. | Menu again. |
|
grayed out | Some setup options may be |
|
|
| mutually exclusive with other |
|
|
| setup options. |
|
|
80