Network Setup, Connection Information | OPPO Digital BDP-93 instruction

S E T U P M E N U O P T I O N S

Network Setup

The “Network Setup” section of the Setup Menu system allows you to configure the parameters for the Internet connection of the player, test the connection and restrict BD-Live access. The menu items in this section are:

Setup Menu

Playback Setup		Connection Information

Video Setup		BD-Live Network Access	Off

Audio Format Setup		My Network	On

Audio Processing		Internet Connection	Ethernet

Device Setup		Wireless Setting

Network Setup		IP Setting	Auto (DHCP)

Exit		Proxy Setting	Off
	Display connection information		Exit
			Exit

1.Connection Information: To display the current internet connection information, such as connection type, IP address, Ethernet MAC, Wireless MAC, etc.

2.BD-Live Network Access: To restrict BD-Live content access. The available options are:

•On – BD-Live access is permitted.

•Limited – BD-Live access is permitted only for contents that have a valid content owner certificate. Internet access is prohibited if the BD-Live contents do not have a certificate. This option ensures that you are accessing only authentic content, although it may block your access to smaller independent content providers.

•Off (recommended) – BD-Live access is prohibited.

3.My Network: To set the My Network (in-home media sharing) client option. My Network option enables the player to stream audio, video and photo from media servers within the home network. The available options are:

•On (default) – Enable the My Network client. A broadband internet connection is required (see details on page 19), and the available media servers are listed inside the “My Network” option of the Home menu (see details on page 43).

•Off – Disable the My Network client. No media servers will be shown in “My Network” option, and a warning message will pop up once you enter the “My Network” option.

4.Internet Connection: To select the internet connection type. The available options are:

•Ethernet (default) – Connect to the internet through the Ethernet cable. Please refer to the connection instructions on page 19. Choosing this will make the “Wireless Setting” option gray and un-selectable.

•Wireless – Connect to the internet through the external wireless adaptor. Please refer to the connection instructions on page 20. Choosing “Wireless” will start the wireless setting procedure, and also make the “Wireless Setting” option in the next row selectable.