CONNECTIONS
HDMI Output Mode and Actual Output Signals
Press [RESOLUTION] to change the resolution of the video signal being output from HDMI OUT jack. The video resolution changes as follows every time [RESOLUTION] is pressed.
Front Panel | HDMI Video Resolution |
|
| ||
Display |
|
| |||
|
|
|
|
| |
| 480 Progressive |
|
| ||
Press [RESOLUTION] |
|
|
|
| |
|
|
| |||
|
|
|
|
|
|
| 720 Progressive |
|
| ||
Press [RESOLUTION] |
|
|
|
| |
|
|
| |||
|
|
|
|
|
|
| 1080 Interlaced |
|
| ||
Press [RESOLUTION] |
|
|
|
| |
|
|
| |||
|
|
|
|
|
|
| 1080 Progressive |
|
| ||
Press [RESOLUTION] |
|
|
|
| |
|
|
| |||
|
|
|
|
|
|
| 1080 Progressive 2424frame |
|
| ||
|
|
| |||
|
|
|
|
|
|
Press [RESOLUTION] |
|
|
Copyright protection system
To play back the digital video images of a BD / DVD via an HDMI connection, it is necessary that both the unit and the TV (or an AV amplifier) support a copyright protection system called HDCP
Note
•When using
•Among the devices that support HDMI, some devices can control other devices via the HDMI jack, this unit cannot be controlled by another device via the HDMI jack.
•The audio signals from HDMI OUT jack (including the sampling frequency, the number of channels and bit length) maybe limited by the device that is connected.
•Among the devices that support HDMI, some do not support audio output (e.g, projectors). In connections with device such as this unit, audio signals are not output from HDMI OUT jack.
•You cannot select the video resolutions which are not supported by the connected TV, except when this unit’s HDMI OUT jack is connected to a DVI compatible display devices with an
•For HDMI OUT jack to DVI connection, after you select an HDMI output mode, corresponding HDMI video resolution will be output. The HDMI video resolution you selected will be output even if the connected TV is not compatible with the HDMI video resolution. If there is no image displayed on the connected TV, please select another HDMI video resolution.
•Video and audio signals may be distorted temporarily when switching to / from the HDMI output mode.
•You cannot change the video resolution during
•You can also change the HDMI output mode from “HDMI Video Resolution” setting in “Video” menu. In this menu, you can confirm what HDMI video resolutions are supported by connected TV. Refer to page 34.
•In order to get natural and high quality film reproduction of
•Even if you set “HDMI Video Resolution” setting to “1080p24”, when the contents of the disc is not compatible for 1080p24 frame, 1080p60 frame will be output.
•There is no output from VIDEO OUTPUT (VIDEO) and VIDEO OUTPUT (COMPONENT) jacks when you play back a BD that recorded
•It is recommended to use High Speed HDMI Cable (also known as HDMI category 2 cable) for better compatibility.
EN | 13 |