CONNECTIONS
■Audio signals output from AUDIO OUTPUT (DIGITAL COAXIAL/OPTICAL) jacks
The audio signals currently output from HDMI OUT jack will be output from AUDIO OUTPUT (DIGITAL COAXIAL / OPTICAL) jacks as well, except that Dolby Digital signal will be output instead of Dolby Digital Plus and Dolby TrueHD, and DTS signal will be output instead of
When “Audio Mute” is selected in “HDMI Audio Out” setting, audio signals output from HDMI OUT jack will be muted and the audio signals output from AUDIO OUTPUT (DIGITAL COAXIAL / OPTICAL) jacks change depending on “Digital Out” setting.
To set “Digital Out” setting, select “Audio Mute” in “HDMI Audio Out” setting.
Disc type | Audio recording format |
| “Digital Out” setting | |
Bitstream |
| LPCM | ||
| ||||
|
|
| ||
|
|
|
|
|
| Dolby Digital | Dolby Digital |
| 2ch Downmix LPCM |
|
|
|
|
|
| Dolby Digital Plus | Dolby Digital |
| 2ch Downmix LPCM |
|
|
|
|
|
| Dolby TrueHD | Dolby Digital |
| 2ch Downmix LPCM |
|
|
|
| |
DTS | DTS* |
| 2ch Downmix LPCM | |
|
| |||
|
|
|
|
|
| DTS* |
| 2ch Downmix LPCM | |
|
|
|
|
|
| LPCM | 2ch Downmix LPCM* |
| 2ch Downmix LPCM |
|
|
|
|
|
| Dolby Digital | Dolby Digital |
| 2ch Downmix LPCM |
|
|
|
| |
DTS | DTS |
| 2ch Downmix LPCM | |
|
|
|
|
|
| LPCM | 2ch Downmix LPCM |
| 2ch Downmix LPCM |
|
|
|
|
|
audio CD/MP3 | 2ch LPCM |
| 2ch LPCM | |
|
|
|
|
|
|
| DTS |
| 2ch Downmix LPCM |
|
|
|
|
|
*For BD titles with secondary or interactive audio, these audio will be output as Dolby Digital when all the conditions listed below are met:
•When “BD Audio Mode” setting is set to “Mix Audio Output”.
•When “HDMI Audio Out” setting is set to “Audio Mute”.
•When “Digital Out” setting is set to “Bitstream”.
If BD titles do not have secondary or interactive audio, the audio will be output as shown in the table.
• This table applies only when HDMI cable is not connected or “Audio Mute” is selected in “HDMI Audio Out” setting.
Note
•In order to output LPCM signal from AUDIO OUTPUT (DIGITAL COAXIAL / OPTICAL) jacks while outputting the HDMI audio signal, set “BD Audio Mode” setting to “Mix Audio Output” and set “HDMI Audio Out” setting to “HDMI Multi(LPCM)”.
Connecting the AC Cord
After you made all necessary connections, connect the AC cord to the AC INLET. Then connect the AC cord to the AC outlet.
VIDEO | PB |
L (PCM//BITSTREAM)
COAXIAL OPTICAL
R
AC INLET
AC outlet
AC cord | AC 120V, 60 Hz |
Supplied cables used in this connection are as follows:
• AC cord x 1
16 | EN |