Network Easy Setting

STEP 5 : Setting

Easy Setting

After connecting your new player for the 1st time and pressing the power button, a screen for the basic settings will appear.

Preparation

Turn on the television and select the appropriate video input on the television.

1 Press [Í POWER].

Setup screen appears.

If this unit is connected to a Panasonic TV (VIERA) supporting HDAVI Control 2 or later via an HDMI cable, then the setting information on the TV is acquired by this TV.

2 Follow the on-screen instructions and make the settings with [3, 4] and press [OK].

After completing “Easy Setting”, you can perform “Network Easy Setting”.

≥You can perform this setup anytime by selecting “Easy Setting” in the Setup menu. (> 29)

≥Initial setting is set to “2ch (Downmix) + 5.1ch”, so you will need to select “7.1ch” if using the 7.1ch output.

Analog Audio Output

Set unit’s analog audio output.

Select only “7.1ch” to enjoy audio from a receiver through 7.1ch analog connections. Otherwise, select “2ch (Downmix) + 5.1ch.”

2ch (Downmix) + 5.1ch

7.1ch

RETURN

After completing “Easy Setting”, you can continuously perform “Network Easy Setting”.

≥Before you perform the wireless network settings on this unit, confirm the set up of your Wireless router (Access point) is done correctly on your PC.

1 Select “Wired” or “Wireless” and press [OK].

Network Easy Setting (Connection Check)

A settings check for home network and Internet connections is now being conducted.

Please select a connection mode first.

Current setting

: Wired

LAN cable connection:

Connect a LAN cable to the unit and select “Wired.” Wireless LAN connection:

Insert a compatible Wireless LAN Adaptor to USB port and select “Wireless.”

Access point is necessary for Wireless LAN connection.

Wired

Wireless

RETURN

2 Follow the on-screen instructions and make the settings with [3, 4, 2, 1] and press [OK].

For wireless LAN connection:

If you are using a Wireless router (Access point) that supports WPS, you can easily perform the settings by selecting “WPS (PUSH button method)”.

Otherwise, perform the settings by selecting “Search for access point” or “Manual setting” in “Other methods”.

Access Point Connection Setting

Select a connection method to use with an access point of Wireless LAN.

Please refer to the operating instructions of the access point about connection methods.

WPS (PUSH button method)

		Other methods
	OK	Search for access point
	OK	WPS (PIN code method)
	RETURN	WPS (PIN code method)
		Manual setting

≥WPS (Wi-Fi Protected Setup) is a function that facilitates settings relating to the connection and security of wireless LAN devices. To see whether your Wireless router (Access point) supports WPS, check the Wireless router operating instructions.

VQT2H76