Network
Network Easy Setting (> 12)
Network Settings
Perform
Press [OK] to show the following settings.
LAN Connection Mode
Select connection method.
Access Point Connection Setting
This allows the Wireless router (Access point) and connection settings to be set and the current connection settings and connection state to be checked when a wireless connection is used.
Connection Setting
The Wireless router (Access point) connection wizard will be displayed.
IP Address/DNS Settings
This is for checking the state of the network connection and setting the IP address and
Press [OK] to show the respective setting.
≥“Connection Speed Setting" is enabled only when “Auto Detect Connection Speed” is turned “Off”.
Proxy Server Settings
This is for checking the state of connection with the Proxy server and performing settings.
Press [OK] to show the respective setting.
Internet Content Settings (> 23) (VIERA CAST)
Press [OK] to show the following settings.
Lock
You can restrict the usage of VIERA CAST.
≥Follow the
password screen is shown.
Audio Auto Gain Control
Volume that is different depending on the contents is adjusted automatically to the standard volume while using the VIERA CAST.
≥Depending on contents, this function effect will not work.
≥Select “Off” when the audio is warped.
Time Zone
By selecting the time zone, it is possible to set the unit’s time to match your location.
≥Some VIERA CAST contents require the time zone to
be set. Set the time zone if necessary.
DST
Select “On” when using Daylight Saving time.
MAC Address
Displays the MAC address of this unit.
Others
Off Timer
Select how long the unit remains on when it is not being used.
Remote Control Code
Change the remote control code, when other Panasonic products react to this remote control.
Quick Start
Speed of startup from power off is increased.
≥Internal control unit will be powered when it is set to “On”, so contents of the following will be different from the time it is set to “Off”.
–Idle power consumption will increase. (about the power consumption > 37)
Easy Setting
You can execute basic settings
Restore Default Settings
This returns all values in the Setup menu and the playback menu, except for “Remote Control Code”,
DivX Registration (> 19)
You need this registration code to purchase and play DivX
System Information
Display firmware version of this unit, wireless LAN module of your Wireless LAN Adaptor.
Firmware Update (> 14)
Press [OK] to show the following settings.
Automatic Update Check
When this equipment remains connected to the Internet, it will check for the latest firmware version when it is turned on and you can update it if necessary.
Update Now
You can update the firmware manually.
Settings
29
VQT2H76