Panasonic DMP-B15 Audio and video information, About audio from audio output terminals

Page 37

Audio and video information

About audio from audio output terminals

Before connecting, read the table below, and confirm the desired audio type and necessary settings (“BD-Video Secondary Audio”, “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD”). (> 33)

≥The number of channels listed is the maximum possible number of output channels.

HDMI AV OUT

Terminal

 

HDMI AV OUT

 

 

 

“Dolby D/Dolby D +/Dolby

“Bitstream”*1

 

“PCM”*2

 

TrueHD”/“DTS/DTS-HD”

 

 

 

 

 

 

“BD-Video Secondary Audio”

“On”*3

“Off”

“On”

 

 

“Off”

Dolby Digital/

Dolby Digital/

Dolby Digital/

 

 

 

 

Dolby Digital EX*4

Dolby Digital EX*5

Dolby Digital EX

 

5.1ch PCM*6

Dolby Digital Plus

Dolby Digital

Dolby Digital Plus

 

 

 

 

 

Dolby TrueHD

Dolby TrueHD

 

 

 

 

 

 

 

 

 

DTS Digital Surround/

DTS Digital Surround/

DTS Digital Surround/

 

[DVD-V] 5.1ch

DTS-ES*4

DTS-ES*5

DTS-ES

 

[BD-V] 7.1ch *7

DTS-HD High Resolution Audio

 

DTS-HD High

 

 

 

 

DTS Digital Surround

Resolution Audio

[BD-V] 7.1ch*6, *7

DTS-HD Master Audio

 

DTS-HD Master Audio

 

 

 

 

7.1ch LPCM

Down-mixed 5.1ch

7.1ch PCM

Down-mixed 5.1ch

 

7.1ch PCM

PCM

PCM*3

 

 

 

 

 

 

 

 

 

≥Also, depending on the specifications or the settings of the amplifier/receiver, the results of the output may vary.

*1 When the connected equipment is not supported with these audio formats, the audio is output as Dolby Digital bitstream, DTS Digital Surround bitstream or down-mixed 2ch PCM (e.g., TV).

*2 When the connected equipment is not supported with multi channel surround, the audio is output as down-mixed 2ch PCM.

*3 [BD-V]: When playing BD-Video without secondary audio or button click sound, the audio is output as the same format as if “BD- Video Secondary Audio” was set to “Off”.

*4 With PCM output, Dolby Digital EX and DTS-ES will be PCM audio decoded as Dolby Digital and DTS Digital Surround respectively.

*5 [BD-V]: When “BD-Video Secondary Audio” is set to “On”, Dolby Digital EX is output as Dolby Digital and DTS-ES is output as DTS Digital Surround, however if playing BD-Video without secondary audio or button click sound, the audio is output as the original format.

*6 The output is PCM audio decoded as Dolby Digital for Dolby Digital Plus or Dolby TrueHD, and as DTS Digital Surround for DTS-HD High Resolution Audio and DTS-HD Master Audio.

*7 [BD-V]: When the connecting equipment supports 7.1 channel surround, output will be extended from 5.1 ch or 6.1 ch to 7.1 ch according to the specification of DTS, Inc.

Enjoying High Bit rate Audio of BD-Video

[BD-V]

This unit supports high bit rate audio (Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio) adopted in BD-Video. In order to enjoy these audio formats, the following conditions are necessary. (Part shown in the shaded area of table given above)

NECESSARY CONNECTIONS

≥HDMI AV OUT terminal: (> 25)

NECESSARY SETTINGS

≥Set “BD-Video Secondary Audio” to “Off”. (> 33) ≥Set “HDMI Audio Output” to “On”. (> 34)

≥HDMI AV OUT terminal: Set “Dolby D/Dolby D +/Dolby TrueHD” or “DTS/DTS-HD” to “Bitstream” or “PCM”. (> 33)

≥The button click sound on the menu and audio with secondary video in picture-in-picture mode (> 17) is not output.

Regarding 24p output

[BD-V]

Many BD-Video movie contents are recorded in 24 frames/second in accordance with the film materials. However, they will normally be output in 60 frames/second in accordance with the display format. These can be output in 24p as the original. Therefore, high- quality video can be enjoyed, such as the improved clarity, enhanced perspective, etc.

Settings

Reference

NECESSARY CONNECTIONS

≥Connect to a TV supporting 1080/24p input via an HDMI cable.

NECESSARY SETTINGS

RQT9334

 

(ENG)

≥“24p Output” and “HDMI Audio Output”: “On” (> 34)

37

 

Page 36 Page 38
Image 37
Page 36 Page 38
Contents If you have any questions contact Region management informationBD-Video DVD-VideoFollowing Applies only in the U.S.A. FCC Note Following mark and symbols are located on rear of the unit≥Reorient or relocate the receiving antenna AC adaptor BatteriesListening caution Following Applies only in CanadaAccessories Table of contentsUnit and media care Commercially sold discs Media Disc and card informationUser recorded media Discs that cannot be played in this unit SD cardsUnit Overview16 17 19 20 Front View Rear View Side View Bottom ViewInsert the button-type battery included Remote controlRange of use When moving the unit Installation of the unitAbout the LCD screen Using the unit connected to the AC adaptor Preparing the Power SupplyUsing the battery pack Turning on/off the unit Easy SettingShowing Functions menu Turn the unit off automaticallyLoading the disc or SD card Adjusting the pictures on the LCD screenDisc SD cardBasic play Playing video contents Other operations during play Chapter playbackBasic play Playing video contents Enjoying BD-Live discs with Internet Enjoying BD-Live or Bonusview in BD-VideoUseful functions during still picture play Playing still picturesZoom out Press 3, 4, 2, 1 to select Set and press OK RotatePress SUB Menu Press 3, 4 to select Zoom out and press OK To show the picture propertiesTo switch from other menus to DivX menu Regarding DivX VOD contentPlaying DivX videos Press 3, 4 to select the title and press OKWhile playing Press Display Displaying subtitles textPlaying music To switch from other menus to MP3 menuPress 3, 4 to select the track and press OK Playing a track in another folderOn-screen menu operations Changing settings with the on-screen menuWhat you can change with the on-screen menu Play menu Changing settings with the on-screenVideo menu Audio menuConnection with the Hdmi cable Using this unit with other equipmentConnection with the Audio/Video cable Power on link Automatic input switchingPower off link Linked operations with the TVUsing the Functions menu to operate this unit Easy control only with Viera remote controlUsing the sub menu to operate this unit BD-V Avchd DVD-VTesting of IP Address/DNS Settings Network settingsBroadband network connection Straight LAN cableSetting the DNS-IP Setting the IP addressSetting the connection speed Testing of Proxy Server SettingsEnjoying Viera Casttm Network settingsAutomatically check the firmware Firmware updatesManually updating the firmware To return to Viera Cast Home screenSetup menu operations Changing the unit’s settingsSummary of settings Press 3, 4, 2, 1 to select the option and press OKAudio VideoTV Aspect/HDMI Function Settings Changing the unit’s settingsDisplay Network Others About audio from audio output terminals Audio and video informationEnjoying High Bit rate Audio of BD-Video Regarding 24p outputDivX About MP3/JPEG/DivX filesSubtitles text file of DivX DVD-R/DVD-R DL/CD-R/CD-RW Structure of folders that can be played in this unitSD card Screen messages Indicators and screen messagesPlease Wait Router settings SettingInternet Access This IP address is alreadyTo reset this unit Troubleshooting guidePower Sound OperationConnection Troubleshooting guideCard NetworkOther difficulties with playback LAN SpecificationsJPEG*6 HdmiBlu-ray Disc is trademark LicensesBD-J GlossaryDTS-HD Viera Casttm Date of Purchase Dealer Name Dealer Address Telephone Number Limited Warranty For U.S.A. and Puerto Rico OnlyProduct Service Limited Warranty For Canada OnlyIndex
Related manuals
Manual 52 pages 27.39 Kb
Top Page Image Contents