Installation of the unit
1 Open the screen. | 2 Rotate the screen. |
4 Open the stand and | 3 Turn the screen |
set the unit vertically. | outwards and close. |
Open the stand and set the unit on a horizontal and stable level surface.
≥Open the stand until the stopper wire is fully stretched.
≥If the screen is rotated when the unit is
turned on, the display on the screen will disappear and the unit will be automatically turned off. (> 12)
≥The unit cannot be turned on in situations
other than 3 or 4 above or when the screen is rotated. (> 12)
≥Rotating the screen without opening the angle enough may scratch the area around the LCD etc. (> 5, “Rotating the screen”)
≥The unit’s speakers do not have magnetic shielding. Do not place the unit near televisions, personal computers or other devices easily influenced by magnetism. Do not keep this unit and magnetized cards (bank cards, commuter passes, etc.) close together.
When moving the unit:
≥Turn the unit off.
≥Close the screen and the stand.
≥Do not hold onto the screen or the stand.
About the LCD screen
There may be 0.01% or less chance of missing or constantly turned on pixels, but this is not a malfunction.
Attention
Do not place the unit with the LCD
Doing so may scratch the surface of the LCD as the display and the area around the display are
RQT9334
(ENG)
10