Adjusting the pictures on the LCD screen, Disc

Adjusting the pictures on the LCD screen

1 Press [LCD].

≥It is also possible to display with the following procedures.

1Press [SUB MENU].

2Select “Other Functions” with [3, 4], and select [OK].

3Select “LCD Menu” with [3, 4], and select [OK].

		LCD Menu

		Picture		Dynamic

			Brightness
			Color
		Monitor			On
			SUB	RETURN
2			MENU	RETURN

	Select the item with [3, 4].
3	Change the setting with [3, 4, 2, 1].

≥Underlined items are the factory presets.

∫When selecting other settings than “AUX” with [AV SELECT]

Picture:Adjusting image quality

≥Standard: Standard

≥Dynamic: Picture with high contrast

≥Night:	Picture suitable for viewing in dark places
≥User	j Brightness :j5 to +5

jColor :j5 to +5

Monitor:Displaying images

≥On:	Image display
≥Off:	No image

∫When selecting “AUX” with [AV SELECT] (> 25) PICTURE:Adjusting image quality

≥STANDARD: Standard

≥DYNAMIC: Picture with high contrast

≥NIGHT: Picture suitable for viewing in dark places

≥USER j BRIGHTNESS :j5 to 5

jCOLOR :j5 to 5

MONITOR:Displaying images

≥NORMAL:	When you want to view 4:3 images
≥FULL:	When you want to view 16:9 images
≥OFF:	No image

≥If you are not using the LCD on this unit, select “Off (OFF)” to conserve power. (The [Í] indicator flashes.)

≥If the settings in “PICTURE” are changed when “AUX” is selected, the settings in “Picture” will also change.

The settings will change in the same way even when something other than “AUX” is selected.

To exit the screen

Press [LCD] or [RETURN].

To display images when the “Monitor (MONITOR)” is set to “Off (OFF)”

Press [LCD] or [SUB MENU]

Loading the disc or SD card

Disc		started
		started
	Clicks	Getting
	Clicks
	into place.

Label side up (Double-sided disc: place the label side up that you want to play back)

OPEN

Lens (> below)

1 Open the screen and press [OPEN].

2 Set the disc holding the unit with your hand and close the lid.

3 Close the screen.

≥Some discs may start playing when it is loaded with the unit turned on.

≥About discs with a cartridge

j BD-RE with a cartridge: It cannot be used with this unit. (It cannot be used even if the disc is taken out from the cartridge.)

j DVD-RAM, 8 cm disc: Remove the disc from the cartridge and set the disc in the tray

j Place the disc back into the cartridge for storage to prevent dirt and scratches after use.

	≥Do not touch the lens as it may	Lens
	make it dirty.	Lens
	make it dirty.

SD card

Insert the card with the corner cut-side up.

Label side

1 Open the cover at the side of the unit. 2 Insert the SD card into the SD card slot.

≥Press on the center of the card until it clicks into place.

3 Close the cover.

To remove the card

In step 2 above, press the center of the card until it “clicks”, and pull the card out straight.

RQT9334

(ENG)