This IP address is already in | ≥This unit’s IP address is used by another device. Check the IP addresses of this unit, |
use. | personal computers, and routers, etc. If necessary, reconfigure them to avoid IP addresses |
Please check the IP address | from being duplicated. |
setting. |
|
Unable to perform Connection | ≥Turn the unit off. Disconnect the power source (the AC adaptor or battery pack) and |
Test. | reconnect it and try again. If the same symptom persists, then consult your dealer. |
Please try again. |
|
IP address not set correctly. |
|
|
|
Connection Test was | ≥If you use a hub, then check the connection between the hub and the router. (> 28) |
unsuccessful. No reply | j Use the UPLINK port of the hub to connect to a router. |
from host. | j If the hub’s Link lamp does not light up, then check the cable connection, LAN terminal |
Please check the connection or | connection, cable itself (a crossover cable may have been used by mistake), etc. |
router settings. | ≥Check the “IP Address”, “Subnet Mask”, and “Default Gateway” in the “IP Address/DNS |
| Settings”. (> 29) |
| ≥If the MAC address information is required, then press [SETUP] to display the “Network” |
| menu. (> 28) |
Network connection refused. | ≥When you set |
Please confirm Setup | which do not have a content owner certificate, the Internet access of the content is not |
Internet Access.” | allowed. If you allow the content to connect to Internet, set |
| “Allow (ALL)”. (> 32) |
Unable to check for latest | ≥The firmware download server is currently unavailable. Please try again later. |
firmware version. |
|
Please try again later. |
|
Reference
RQT9334
(ENG)
41