Output Selection Feature
You may choose from HDMI, COMPONENT,
Use the OUTPUT SELECT button on the front panel of the unit to select the video output while the disc is stopped.
-Video Output mode changes as follows when the OUTPUT SELECT button is pressed: HDMI ➞ VIDEO ➞ COMP ➞ HDMI order.
-To select HDMI output, press the OUTPUT SELECT button until the HDMI indicator lights.
-To select COMPONENT output, press the OUTPUT SELECT button until the COMP indicator lights.
-To select VIDEO or
■ If HDMI mode is selected for TVs providing display information (EDID), the TV resolution
NOTE | will be automatically changed to the best |
| |
| quality supported by the TV. |
■If HDMI mode is selected for TVs that do not provide display information (EDID), resolution will be adjusted to 480p.
■If COMP (Component) mode is selected, resolution will be adjusted to 480p initially.
■If VIDEO mode is selected, resolution will be adjusted to 480i.
■Select the resolution from <Setup> ➞ <Display Setup>. (See page 41~42.)
Choosing a Connection
The following shows examples of connections commonly used to connect the
Connecting to a TV with HDMI Cable
1. Using the | Connecting | |
the HDMI OUT terminal on the rear of the | ||
disc player to the HDMI IN terminal of your TV. | ||
|
2. Press the OUTPUT SELECT button on the front panel of the unit until the HDMI indicator lights. Make sure the unit is in Stop mode.
3. Press the input selector on your TV remote control until the HDMI signal from the
• If you have set the remote control to properly operate with your TV (pages 14~15), press the TV INPUT SEL. button on the remote control and select HDMI as the external source of the TV.
HDMI cable (not included)
HDMI Auto Detection Function
Connecting the HDMI cable while the