Connecting
Connecting to a TV(Video)
1.Using video/audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT terminals on the rear of the
2.Turn on the
3.Press the OUTPUT SELECT button on the front panel
of the unit until the VIDEO indicator lights. Make sure the unit is in Stop mode.
4.Press the input selector on your TV remote control until the Video signal from the
•If you have set the remote control to properly operate with your TV (pages 14~15), press the TV INPUT SEL. button on the remote control and select VIDEO as the external source of the TV.
| ■ | Noise may be generated if the audio cable |
|
| placed too close to the power cable. |
NOTE | ■ | If you want to connect to an Amplifier, |
| ||
|
| please refer to the Amplifier connection |
|
| page. (See pages 20~22) |
| ■ | The number and position of terminals may |
|
| vary depending on your TV set. Please refer |
|
| to the user's manual of your TV. |
| ■ | If there is one audio input terminal on the TV, |
|
| connect it to the [AUDIO OUT][left] (white) |
|
| terminal of the |
| ■ | If you set the OUTPUT SELECT to HDMI, |
|
| the |
|
| terminals will not output any signal. |
|
|
|
Connecting to an Audio System (2 Channel Amplifier)
1.Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the
2.Using the video signal cable(s), connect the HDMI OUT, COMPONENT,
3.Turn on the
4.Press the input select button of the Amplifier to select the external input in order to hear sound from the
WHITE
RED
Audio Cable
RED WHITE
Manufactured under license from Dolby Laboratories. “Dolby” and the
“DTS” and “DTS Digital Surround” are registered trademarks of DTS, Inc.